George,
I don't have a PTS160 but my PTS040 is mechanically almost identical.
On my unit, which has the overnized oscillator, the calibration screw
can be easily accessed removing the top cover since it is in the top of
the oscillator, not on its side as suggested by the hole below the
Frequency Standard label in the back of the unit. Maybe this hole is
for the TCXO equipped units.
If you want a photo that shows the position of the screw (in fact the
screw is a cover for keeping the oven closed, removing it you can access
the actual tunning screw), just ask. In the photo you can also see the
module arrangement in a unit with .1 Hz resolution so you can compare
with your unit.
73 de Ignacio, EB4APL
On 03/06/2011 19:59, George R Allen wrote:
Does anyone know how to calibrate the internal xtal standard within the PTS
160? Mine is off by about 50HZ. I can use the Rubidium standard, that I use
for the F5K if necessary; but, would like the unit to be calibrated.
Thanks
George
K2CM
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
