That is definitely better. But it is still a tad jumpy. That really settled down the RIT and XIT adjustments nicely.
73, Scott AC8DE -----Original Message----- From: Tim Ellison [mailto:[email protected]] Sent: Wednesday, June 15, 2011 4:53 PM To: Scott Myers; [email protected] Subject: RE: [FlexEdge] FlexControl "Nervousness" Yes, turn off Tuning Acceleration in the FlexControl form. -Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Scott Myers Sent: Wednesday, June 15, 2011 4:39 PM To: [email protected] Subject: [FlexEdge] FlexControl "Nervousness" I have noted that the FlexControl can be a bit "nervous" when you are trying to make small adjustments. I've had it want to sit there and dither back and forth between two or three steps. Also, when I am turning it slowly, it will often jump by a step. For instance, with steps set to 250 Hz, it may jump from 250 to 750 and then I have to come back to 500. I tried turning down the send and receive buffers in device manager for the com port, but that didn't seem to have any effect. Seems the electrical averaging is having difficulty. Any suggestions? 73, Scott AC8DE _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
