Hi folks.
I have gotten Ale to work on my 3K sort of at least, need advice of
those who have
been there done that.
I have set up a basic scan on 80-10M and I used tune in PSDR (latest) to
be sure I have a good match on all bands as I manually step through
them, however when I scan in PC-ALE it reverts to bypass.
Since without the tuner I don't want to Tx I am unable to do soundings.
I thought the Flex would remember the settings for the tuner and allow
me to do this but either I am missing something
or the rig is not able to hold the settings in memory for scanning.
My second question has to do with the relay click as it scans, I know a
feature has been built
into the SW to allow some dual VFO rigs to scan in split on the second
VFO without any band switching (relay switching) in Rx while
receiving-then if it has to TX it would switch to the other
VFO and allow the proper relay to switch in any needed filtering for TX.
Any thoughts, can it be done?
Thanks,
Ted W3VG
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
