Apologies if this is an old question, but I've searched the Yahoo FlexRadio group and the KB/wiki, and posted there, to no avail, except that another user echoed having the issue also.
Configuration: Flex 1500 Macbook Pro/Win7 (Native/Bootcamp) PowerSDR 2.2.3 CW Mode Any frequency band When I activate the TUNE button, the PowerSDR Forward Power meter shows the appropriate Tuning power level (varies with the Tune power level set in Setup). If I measure the actual output power with a wattmeter, I'm getting the appropriate power out, all the way up to 100% if it's set that way. So far so good. However, when I actually transmit (CW, key down), the PowerSDR Forward Power meter always shows zero percent, no matter what the Drive setting is. Drive: 50 = FP: 0%; Drive: 100 = FP: 0%. Again, if I measure the actual output power with a wattmeter, I am getting the appropriate power levels out, so the transmitter is working. How do I get PowerSDR's Forward Power meter to show real % power out instead of zero percent all the time when transmitting? (I know it's a relative reading, not watts). Thanks, - Les, W9XC _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
