Hi All
You may read all comments regarding this topic at the link below
http://helpdesk.flexradio.com/entries/20399161-voltage-and-temp?page=1#post_21268058
After nearly 3 years of operation of my Flex 3000 - mainly using digital
modes - I have come to believe that my radio cannot handle full tx power
using high duty cycle modes such as Olivia etc - In my climate (summer
time temps up tp 40c) the radio is not capable of cooling adequately at
any more than approximately 30 to 40 percent of full output and even this
level will take PA temps to 80c and above - I now believe that it is
imperative that the PA temp is permanently displayed on the GUI and not
require operator intervention to display it Surely it is just a small
request to have this displayed when one considers the visual benefits of
having it displayed with a colour code to indicate critical temperatures
Owners Manual version 1.18.0 states as follows---- The keyboard
combination of Ctl-Shift-I will display the voltage and temperature.
Clicking on the temperature will alternate its value between Celsius or
Fahrenheit. Either value may be displayed against a yellow or red
background indicating levels of critically ----- I HAVE NEVER -EVER -SEEN
THIS FEATURE WORK - Certainly would be nice to see the powers that be
relent and accede to this request
Les VK2DSG
--
Using Opera's revolutionary email client: http://www.opera.com/mail/
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
