And I think what George and Neal (and of course myself) are really looking for are drivers and APIs, not simply CAT controls.
There is a need to merge logging apps with radio control application as well as other station control applications, especially while contesting where things are fast and loosing focus of the window you need to have active can be disastrous. Same would be nice for FLEX series of radios. -Greg, N2GZ/1 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Neal Campbell Sent: Thursday, May 24, 2012 12:30 PM To: George Allen Cc: Flexedge Subject: Re: [FlexEdge] (a Blue Sky note) with the 6000 series, I should be able to.... I completely agree with these! 73 On May 24, 2012, at 12:19 PM, George Allen wrote: > 1. Write my own display/control software on my PC, assuming that I have interface info and license to do it. After all, the signal processing is done in the 6000, the PC is merely control and display. As an example. I should be able to send a command to the 6000 requesting a frequency change, and a band-display table to go with that frequency. > > 2. If source were available, I should be able to modify the application on my PC to make changes that I require. > > 3. Write my own logging app...either by sending commands and receiving data via the hardware or via the supplied PC software's interface. > > 4. Put my contacts, call, frequency, and the like, on the web in real time! See, in real time, that you really are in the log for Broome County, NY! > > It would be nice, but not an an absolute requirement, if Flex were to supply basic PC interfaces to interface to their hardware. License-able, I presume. > > (My staff and fellow workers upon occasion accuse me of living in the Blue Sky, so these thoughts may be too simplified, and might be mere speculation! Its really pretty nice up here in the Sky!) > > George (who tries to live in the real world some of the time) > K2CM > Vestal, Broome County, NY > > > . > > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
