Bret, Excellent! I have missed the NR on the K3 and your suggested parameters have given it back -- thanks! Clyde, K2UE ------------------------------
Message: 4 Date: Wed, 23 May 2012 17:34:36 -0600 From: "Bret Mills" <[email protected]> To: <[email protected]>, <[email protected]> Subject: Re: [FlexEdge] I am still waiting for a working NR in my PowerSDR formy Flex 5000 Message-ID: <5F76957333C142CB82FB04053C699CA8@wx7yLaptop> Content-Type: text/plain; charset="us-ascii" Hi Howard I have changed the settings on my NR and it is much better (TO ME anyway). Here are my settings if you want to give them a try, I had a K3 for a few months I liked the NR and ANF filters and these settings were very close to how the NR and ANF sounds on the K3. Write down your original settings if you don't like the results these settings give you. Click on Setup, then DSP NR Taps: 40 Delay: 30 Gain: 15 Leak: 10 I also changed the "ANF" settings to my liking and here is what I like on my Radio's. ANF Taps: 68 Delay: 60 Gain: 25 Leak: 1 I have my "Buffer Size" set for Phone RX: 4096 TX: 2048 CW RX: 4096 Digital is at the defaults of 2048 IF you have to reset your Database then you will loose these settings and they will go back to default's so you may want to save a Database. Don't be afraid to play with the PowerSDR settings, it is a wonderful radio and you really can't hurt anything. I keep a Backup Database after each change I like so I can ALWAYS step backward to the previous Database if something goes haywire. 73's and have a good evening Bret WX7Y _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
