Thanks Steve, The wavenode just supplies a relay that energizes when a swr preset is reached. I now just use it in series with the ptt function of the mic but would like to disable all modes not just voice. This could probably work with what you describe.
Thanks and 73's; Happy Easter, Joe WD5Y > Joe, > > The connector can be used in either polarity (active high or active low). > When the TXREQ signal is asserted, the radio will enter the transmit mode > when PTT is pressed, but no RF can be emitted until the TXREQ signal is > de-asserted. I'm not familiar with the Wavenode products so I can't > comment on this device, specifically. > > Steve > > Stephen Hicks, N5AC > VP Engineering > FlexRadio Systems™ > 4616 W Howard Ln Ste 1-150 > Austin, TX 78728 > Phone: 512-535-4713 x205 > Email: [email protected] > Web: www.flexradio.com > Click Here for PGP Public > Key<https://sites.google.com/a/flex-radio.com/pgp-public-keys/n5ac> > > > > *Tune In Excitement™* > PowerSDR™ is a trademark of FlexRadio Systems > > > On Fri, Mar 22, 2013 at 3:16 PM, <[email protected]> wrote: > >> I noticed the TX Inhibit connector on the rear of the Flex 6000 unit. I >> think I understand that if the "center" connector is grounded the >> transmit >> will be disabled; is this correct? If so, could I then connect this >> through my "Wavenode - WN2" unit for the high swr protect relay >> function. >> This would allow all transmit functions to be protected; as it stands >> now >> I have this tied only through my MIC PTT switch. I realize that this >> would >> also connect remotely for offsite protection of transmit. >> >> Thanks, >> Joe >> WD5Y >> >> >> >> _______________________________________________ >> Flexedge mailing list >> [email protected] >> http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz >> This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is >> used for posting topics related to SDR software innovation and other >> technical SDR topics. >> > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software innovation and other technical SDR topics.
