Tim, What impact if any to the MARS modification. Do I need to contact you guys for a new file?
Larry W8LIG > > > Message: 1 > Date: Sun, 14 Apr 2013 23:10:42 -0400 > From: "Tim Ellison, W4TME" <[email protected]> > To: "[email protected]" <[email protected]> > Subject: [FlexEdge] Announcing the general availability of PowerSDR > v2.6.4 > Message-ID: <[email protected]> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > To all FlexRadio Systems customers, > > FlexRadio Systems announces the general availability of PowerSDR^(TM) > v2.6.4. This is a general availability release version intended for use > with the FLEX-1500^(TM), FLEX-3000^(TM) and FLEX-5000^(TM) software > defined radio transceivers. It contain bug fixes and new features, some > of which are described below. A complete listing can be found in the > release notes. > > =================================== > Important Considerations before Installing PowerSDR v2.6.4 > > This release of PowerSDR contains a new Firewire driver for the > FLEX-5000 and FLEX-3000 SDRs and new firmware for all FLEX Series SDRs. > It is highly recommended that you review the PowerSDR v2.6.4 Release > Notes before installing to minimize any installation problems you may > encounter. > > =================================== > PowerSDR v2.6.4 Major Feature Highlights: > > A new and improved Firewire Driver for the FLEX-5000 and FLEX-3000 - > This update is the most significant in the PowerSDR v2.4.6 release. The > 4.1.1.17085 streaming Firewire driver fixes numerous defects and > provides some additional performance improvements over the 4.0.0 > Firewire driver. A significant amount of development resources went > into qualifying this new Firewire driver, as hardware drivers are > foundational components of the PowerSDR / FLEX-5000 / FLEX-3000 radio > "system". Due to the Firewire driver update included in this release, > please make sure that you review the PowerSDR v2.6.4 Release Notes > before installing. Specifically, how to use PowerSDR v2.4.4 or v2.5.3 > with the new driver. Also users of Windows XP systems will need to > ensure that you manually install all three Firewire device drivers the > first time you power up your FLEX-5000 or FLEX-3000 after the installer > has rebooted your PC to complete the Firewire driver installation. The > need for manually installing the FLEX Firewire driver is not required > for Windows Vista and greater, as the Firewire device driver > installation is completed automatically without manual intervention. > > New frequency allocations for EU countries - PowerSDR v2.6.4 allows > users in the UK that have had their radios modified for 60m operation > (requires a NOV and TURF software from your FlexRadio Dealer) to operate > on the new 11 frequency segments in the 60m band. Swedish operators now > have access to their 60m band segments (requires the radio to be TURFed > for Sweden). Radios TURFed for operation in France, Italy and Russian > have minor updates to their transmit frequency allocations. Please > refer to the PowerSDR v2.6.4 Release Notes for additional information > regarding the TURF software process for certain countries where transmit > regulatory compliance is required. > > Additional Time & Frequency stations added to WWV bandstack, Easy > frequency select for frequency calibration and a centered Panadapter for > the FLEX-1500 - The CHU frequencies with their default mode have been > added to the WWV band button (bandstack) to provide additional > frequencies for the user to choose for frequency calibration purposes. > To complement the new CHU additions, there is new a feature in the > Frequency Calibration routine that will allow the user to select the > current VFO-A frequency eliminating the need to manually enter it. Also > included with this version of PowerSDR, the default display settings for > the FLEX-1500 have been refactored so that the VFO-A carrier line is now > better centered in the middle of the Panadapter rather than being skewed > to the right hand side of the Panadapter so that equal amounts of > spectrum above and below the VFO carrier frequency can be viewed. > > =================================== > Where to get PowerSDR v2.6.4? > > PowerSDR v2.6.4 is available for download from the FlexRadio Systems web > site. > > PowerSDR v2.6.4 Release Notes: > http://support.flex-radio.com/Downloads.aspx?id=417 > PowerSDR v2.6..4 Integrated Installer: > http://support.flex-radio.com/Downloads.aspx?id=416 > > =================================== > Getting Technical Support: > > If you encounter issues installing or operating PowerSDR v2.6.4 with > FlexRadio's software defined radios, please contact FlexRadio Systems > technical support by opening a HelpDesk support ticket on-line at > http://helpdesk.flexradio.com > > > -Tim > -- > Tim Ellison, W4TME > Product Management, Sales & Support > FlexRadio Systems^(TM) > 4616 W Howard Ln, Suite 1-150 > Austin, TX 78728 > Phone: 512-535-4713 Ext. 223 > Email: [email protected] <mailto:[email protected]> > Web: www.flexradio.com <http://www.flexradio.com> > > logo > > > ------------------------------ > > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software innovation and other technical SDR topics.
