To all of you folks out there with the Delta 44 trying out Beta v1.3.4,
please pay special attention to the release notes.
// Modifications:
//
// Issue: Delta 44 Max VRMS Change.
// Description: Previously the max VRMS for the Delta 44 was set at 3.8V.
// However, this was measured on the +4dBu output setting.
// This poses a serious risk of overdriving the amplifier if
// the PA is not calibrated correctly as the PA needs less
// than 1 Volt to drive it to 100W. For this reason, we are
// changing the voltage for the Delta 44 to read 0.98V. It
// is imperative that the output be changed to match this
// new voltage setting on the Delta 44 control panel. Use
// the -10dBv setting for the output. I will get with N9VV
// and have him update the screenshots on his site.
// Reported By: KE5DTO
Link: http://www.flex-radio.com/forum/viewtopic.php?p=7625#7625
