I loaded up Phil's program, vCom, drivers. Loaded without a hitch except it continues to connect to Com Ports 24 and 25, and the PowerSDR console only will go only to port 20. I had edited the N8VBvCOM.inf to read below before I installed. I did try to edit the registry to force port 8 and 9 , but those were reset to Ports 24 and 25 after the reboot. I would have thought that the first vCom port would have been 8, not 24. I am currently using 1 through 7 now.
Any ideals? Thanks and 73, Dudley WA5QPZ ;Number Of Pairs ;************ PAIRS=0x01 PAIRS=0x02 PAIRS=0x03 ;PAIRS=0x04 ;PAIRS=0x05 ;PAIRS=0x06 ;PAIRS=0x07 ;PAIRS=0x08 ;PAIRS=0x09 ;PAIRS=0x0A ;NOTE: MAX is 10 pairs ;Pair 1 ;************ PORT5="COM8" PORT6="COM9" ;Pair 2 ;************ PORT7="COM10" PORT8="COM11" ;Pair 3 ;************ PORT9="COM12" PORT10="COM13" ;Pair 4 ;************ PORT11="COM14" PORT12="COM15" ;Pair 5 ;************ PORT13="COM16" PORT14="COM17" ;Pair 6 ;************ PORT15="COM18" PORT16="COM19" ;Pair 7 ;************ PORT17="COM20" PORT18="COM21" ;Pair 8 ;************ PORT19="COM22" PORT20="COM23" ;Pair 9 ;************ PORT1="COM24" PORT2="COM25" ;Pair 10 ;************ PORT3="COM26" PORT4="COM27"
