Ron, I'm not sure I understand the failure that you are describing. Are you saying that in SSB it puts out 50W of CW? If this is what you are describing, try unplugging the mic and/or setting the PWR = 0. If you still see power output, then you are looking at some kind of hardware oscillation.
Put me back on the right track if I missed the mark entirely. Eric Wachsmann FlexRadio Systems PS. You will likely get more responses if you don't leave the contents of a digest ahead of your message. ;) -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ron Smith Sent: Monday, August 08, 2005 6:52 PM To: [email protected] Subject: [Flexradio] Help I'm having transmission troubles with Ver. 1.4.4 When I transmit with the MOX key the transmitter puts out 50 watts of cw tone. This should not happen as I run mostly SSB and PSK31. I run SSB direct from the Flex Console and run PSK31 with MixW. Everything works fine on Ver. 1.4.3. Nothing has changed other than the version I'm running. Has anyone else complained of this problem? I am running the Delta 44 card with a Pentium 4, 1.6 gig setup. I'm running the Heil PR-20 mike through the Behringer UB802 mixer for voice and PSK31 on transmit. All still works well in Ver 1.4.3. AA1VG, Ron
