Mitch, A value that high is very unusual and would mean that the oscillator is outside of the frequency spec. If you continue to see values that are off by that much, please contact us directly for information on getting it fixed.
Mike makes a good point. Make sure that if you're using the Delta 44 that you have the orange cables in the even numbered plugs. Otherwise you would be calibrating on the image rather than the actual signal. Eric Wachsmann FlexRadio Systems -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mitch Easton Sent: Tuesday, August 16, 2005 11:45 AM To: [email protected] Subject: [Flexradio] New SDR-1K: Freq Cal Question Greetings to All, This excited newbie just joined the "family" so please pardon any/all dumb questions. My SDR is fresh out of the box, and both of us are getting settled in nicely. Running v1.4.4, Delta-44 on 3.2GHz P4, 2GB ram and XP Pro (SP2). Sensitivity seems great (verified with Fluke 6060B & Elecraft XG1 sig gens) but display freq was waaaay off. In fact, I was unable to perform auto freq cal, and had to resort to manually entering an offset of '859500' to get me on target. Admittedly, my SDR experience is literally only two hours old, but this seems like an excessive offset to get on target. Can I get a reality check here please? Thanks! 73, Mitch - W2MDE _______________________________________________ FlexRadio mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
