Presonus delivered a downloadable image that will reflash the PROM and
fixes the problem. Expect to hear more soon from Flex. They knew of
the problem and waited until a critical mass arrived on their door step.
Bob
Rick Fletcher, KG6IAL wrote:
There's still the issue that their own documentation lists the Firebox as
having a 50KHz range which it clearly does not. There's also this thing
called the Uniform Commercial Code as well as Truth-in-Advertising laws
which can be used to hold their feet to the fire.
Basically, they can handle this in one of three ways: (1) Fix it, (2) Buy
back the defective units or (3) Face a very expensive class action lawsuit
which will cost them far more than the first two options. This last option
will garner them far more negative publicity in a very competitive market,
something which could ultimately be difficult if not impossible to overcome.
Let's hope that reasonable minds at Presonus, advised of our dissatisfaction
and their legal obligations, will prevail and they will soon correct this.
Rick
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tim Ellison
Sent: Wednesday, April 05, 2006 10:13 AM
To: Jim Lux; Flex Radio
Subject: Re: [Flexradio] All Firebox users - Please read
Jim,
Thanks for your comments and insight.
I hope you are not correct in you presumption that they might not fix it
for the reason you stated below, but that is a possibility. Even with
the limitations using 96K, the Presonus is a very good interface for use
with the SDR1K with the particular features it brings to the table, such
as balanced inputs, mic preamps, headphone jack and volume control and
the good dynamic range numbers.
If they do no choose to fix the problem, then I suspect I'll be looking
for a more complete solution in the future.
--
AMSAT VP Engineering. Member: ARRL, AMSAT-DL, TAPR, Packrats,
NJQRP/AMQRP, QRP ARCI, QCWA, FRC. ARRL SDR Wrk Grp Chairman
Laziness is the number one inspiration for ingenuity. Guilty as charged!