Clyde, Here's the step by step method to making it like and accept LPT3...
Open Control Panel, then System, Hardware, Device Manager, and click on Ports (COM & LPT). You'll see the LPT3 port that you just added. Double click on it to display its Properties. Click on the Resources tab, and write down the first number under I/O Range. You'll use that with the PowerSDR setup. Now, open PowerSDR, click Setup, General, Hardware Config, and under Hardware Setup (center of the page) you'll see LPT Address. Click the flyout which will highlight the default address (normally 378). Type in the number you wrote down from Device Manager above, click OK and you should be good to go. I also added a PCI LPT card to run a second printer, and it came up with an I/O address of 9868, but enter whatever you found in the first steps above. If this doesn't work for you, let me know, and we'll try plan B (half of pound of C4) ;o)) You just have to show these blooming computers who's boss! Hope this helps. Army Curtis - AE5P Nacogdoches, the oldest town in Texas -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Saturday, April 21, 2007 2:56 PM To: [email protected] Subject: [Flexradio] Parallel Port Help I bought the single port Byte Runner card that Flex recommended. It's Saturday so I can't get any factory support till Monday. It installed ok but they don't supply any drivers for XP. I loaded what I guess is the 2000 drivers and it shows up in the list. It shows LPT3 but if there is a number that you plug into the SDR1K I don't know where to find it....Anyone help? Flex don't like "LPT3" !!! Clyde W8EGB _______________________________________________ FlexRadio mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.446 / Virus Database: 269.5.6/770 - Release Date: 4/20/2007 6:43 PM -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.446 / Virus Database: 269.5.6/770 - Release Date: 4/20/2007 6:43 PM _______________________________________________ FlexRadio mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
