I just did a test with W2IHY's EQplus and it works great as a preamp for my ProSet Plus! Headset.
-Tim -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ray Andrews Sent: Monday, June 04, 2007 11:37 AM To: [EMAIL PROTECTED]; flexradio@flex-radio.biz Subject: Re: [Flexradio] Heil ProSet with the SDR-1000 and Delta-44 Tom, I am using the Heil ProSet Plus with the Delta-44 card. I found that it does need a pre-amp. Otherwise, the mic gain has to be set too high & I get some instability. I use an NCS Multi-Switcher to switch the headset between my SDR & my FT-847. The Multi-Switcher includes a pre-amp for leveling the audio between different audio sources. I use the Heil Yaesu adapter cable, plugged into the Multi-Switcher & the Multi-Switcher is plugged into the front panel connector on the SDR. 73, Ray, K9DUR -------------- next part -------------- An HTML attachment was scrubbed... URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachment s/20070604/c32070ca/attachment.html _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/ _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/
