It currently allows everyone to talk to everyone because my main use is to have my steppir controller follow the radio and it does its own polling and times itself out if it doesn't receive a response. I haven't had any bad interaction yet but if its an issue I can make one port "read only"
Neal On Nov 26, 2007 8:27 PM, Tim Ellison <[EMAIL PROTECTED]> wrote: > As long as one device is designated as read/write and all others are read > only, things should be OK. > > -Tim > ---- > > > -----Original Message----- > From: Mark Amos [mailto:[EMAIL PROTECTED] > Sent: Monday, November 26, 2007 3:20 PM > To: Tim Ellison; 'Mark Amos'; [email protected] > Subject: RE: [Flexradio] Need another CAT input... > > Yes, that would be a problem. In my case, one device wants to set the > frequency and the other wants to read it, so I don't believe it should be an > issue for me. > > Mark > > -----Original Message----- > From: Tim Ellison [mailto:[EMAIL PROTECTED] > Sent: Monday, November 26, 2007 3:05 PM > To: Mark Amos; [email protected] > Subject: RE: [Flexradio] Need another CAT input... > > What happens when all of the devices start changing the state of PowerSDR > and one device expects it to be in one state, but another CAT device changes > it to something else. If it is PTT assertion, this could get very ugly. > > -Tim > ---- > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Mark Amos > > Sent: Monday, November 26, 2007 2:04 PM > To: [email protected] > Subject: [Flexradio] Need another CAT input... > > Folks, > > I'm thinking about how to get multiple cat devices talking to the Flex. > Here's my dilemma: I use a Palstar Autotuner connected to a com port to > query the Flex for frequency > information so that it can track my movement up and down the band. I'd also > like to use a com port to > send CAT commands to the Flex. Unfortunately, there's only one CAT input > port in the PowerSDR software. > > For example, I use COM1 serial port to talk to the Palstar. I'd like to be > able to use HRD to control > the Flex. But with Palstar hooked up to the radio, I can't hook up HRD... I > think the ideal situation > would be to have a couple of CAT control inputs to PowerSDR. > > So, I'm looking for ideas to overcome this issue. > > Any thoughts? > > Mark > W8XR > > > _______________________________________________ > FlexRadio mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Knowledge Base: http://kb.flex-radio.com/ > FlexRadio Homepage: http://www.flex-radio.com/ > > > > _______________________________________________ > FlexRadio mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Knowledge Base: http://kb.flex-radio.com/ > FlexRadio Homepage: http://www.flex-radio.com/ > > _______________________________________________ FlexRadio mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/

