John,
Have you looked into Steve WIKI page at the info there?
http://k5fr.com/ddutilwiki/index.php?title=Main_Page
Just not use the BDC section. If still not able to get it to work, you
might contact Steve, K5FR, directly.
73,
Dudley
WA5QPZ
John Vandenberg wrote:
I am building a simple remote antenne switch and want to control it
with DDUTIL. The hardware consists of a modified Ameritron RCS8-V (5
position antenne relay and control box). In the control box I added
optoisolators and drivers for the relays. The interface uses an LPT
port on the computer going via a cable to the control box.
I want to find out how to setup DDUTIL to send bits to the control
box. There is no translation to BCD required. Bits 0 to 4 select ant1
to ant5. There is one extra bit 7 to enable the old Drake L4B AMP.
Also need to find out how to read the HF band on PowerSDR and send the
corresponding bit to the control box.
John
ve3dvv
_______________________________________________
FlexRadio Systems Mailing List
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage:
http://www.flex-radio.com/
Message delivered to [email protected]
_______________________________________________
FlexRadio Systems Mailing List
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
Message delivered to [email protected]
