Thanks John, Appreciate your reply. I have PSDR set as you mention and the VAC cables as Dudley mentioned but does not work.
Art K8JK ________________________________ From: John Sweeney <n...@comcast.net> To: w8...@yahoo.com Sent: Thu, January 28, 2010 10:16:53 PM Subject: RE: [FlexEdge] Fw: Remote 5000a I do use Skype here also with out problem. I do notice that often on start up of Skype, the sound configuration in Skype changed and I have to change Skype back to the appropriate VAC cable numbers. The sound settings do not save properly. Also, make sure that in PowerSDR, in VAC settings that Direct I/Q output to VAC is NOT checked. Just enable VAC, but not direct to I/Q. Just some ideas to check. good luck. John, N3WT -----Original Message----- From: flexedge-boun...@flex-radio.biz [mailto:flexedge-boun...@flex-radio.biz]on Behalf Of w8...@yahoo.com Sent: Thursday, January 28, 2010 10:06 PM To: flexradio@flex-radio.biz; Flex Edge Subject: [FlexEdge] Fw: Remote 5000a Any other suggestions? Thanks, ART K8JK ----- Forwarded Message ---- From: Dudley Hurry <dud...@flex-radio.com> To: w8...@yahoo.com Cc: flexradio@flex-radio.biz; Flex Edge <flexe...@flex-radio.biz> Sent: Thu, January 28, 2010 1:51:55 PM Subject: Re: [FlexEdge] Remote 5000a Art, You need to have Skype attached to the virtual audio lines, upside down from the way PSDR is connected, Virtual 2 as the input and Virtual 1 as the output in your case. Remember that VAC looks just like another sound card device, with PSDR connected at one end and your app on the other end.. 73, Dudley WA5QPZ FlexRadio Systems (512) 250-8595 Email: dud...@flex-radio.com Web: www.flex-radio.com "Tune in excitement!" ™ On Thu, Jan 28, 2010 at 11:43 AM, <w8...@yahoo.com> wrote: Hello all, > >Am trying to get skype and the 5K interfaced. Skype is up and runni ng. VAC is >up and working Have virtual cables 1 and 2 setup per the article in theKC. The >article in KC does not show the current versions of skype or PSDR. So far >haven't been able to get the 5K audio in or out of skype. >Am using PB 1.19.3, svn 3512. Sample rate48K and stereo unchecked. What am I >missing ? > >Thanks to anyone that can help. > >Art, K8JK > > > >_______________________________________________ >Flexedge mailing list >flexe...@flex-radio.biz >http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz >This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used >for posting topics related to SDR software development and experimentalist who >are using alpha and beta versions of the software. > _______________________________________________ Flexedge mailing list flexe...@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/