Due to my recent hard drive failure, I have not had a chance to update the SDRDataTransfer installation with the new setup data file yet. Until I can get that done, hopefully by the end of the week, please take note of the following:
1. If you are already running SDRDataTrransfer v3.1.1, do not re-install the software, you will still have the old setup data. Instead use the "Update Setup Data" function built into SDRDataTransfer to get the updated setup data. Click on "File" on the menu bar & then select "Update Setup Data" to access the function. 2. If you are installing SDRDataTransfer v3.1.1 for the 1st time or are upgrading from a previous version, after installation you need to update the setup data as described above before you try to transfer any PowerSDR data. I will announce on this reflector when the SDRDataTransfer installation package has been updated. 73, Ray, K9DUR http://k9dur.info _______________________________________________ FlexRadio Systems Mailing List [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
