Hi Paul

Thanks for all the info ..

I've gotten the full suite working with Digital modes, but haven't figured
out how to get HRD/DM780 to transmit CW with PowerSDR.

Have you been able to do that ?

Thanks
Dave

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Paul Mullins
Sent: Tuesday, February 16, 2010 9:17 PM
To: [email protected]
Subject: Re: [Flexradio] CW using DM780

 I have found it to be easy if you are using the complete ham radio deluxe
package,  there is a couple of boxs you do need to check in the setup for
allowing the ptt to be controlled via cat. I normally run nv8 com program to
to the serial port normally I set mine to com
16 on the powersdr software speed to 56700 and the emulation I have found
that powersdr works in HRD.
 When HRD is ready to connect  I use com 6 (the other end to the com
16 port) select powersdr and the correct speed 56700 then just let it
connect.
 When HRD has finished its bit in reading and setting up the screen there is
a TX button on the RHS make sure you have a tuned antenna or dummy load
connected first whilst testing. If you select TX in HRD then toggle back to
powersdr and see if the MOX has changed state. If this works then DM780
should work via the HRD interfacing.
 Basically you need to get this part working, you can make the DM780 work
directly BUT I have found it to be slow, I dont know why, but it is.
 With PowerSDR open and HRD open you should be able to run DM780, believe it
or not I normally run the full HRD suite on top of PowerSDR, including sat
tracking, log book, the rotator control being the smallest program in HRD
package uses the most CPU time.
 Now DM780 is up you can make it connect to HRD as a local host, you can
also run it via a network/ internet works very well even on load speed 3g
networks (a dig at my 3g network). You should see info from HRD being showed
up like the freq, mode and other stuff. Yous will also need to set up
virtual audio cables aswell if you have not done so.
 BTW I am doing this from my head at work with no radio in front of me or
software.
 If you still need help in setting all of this up contact me off line and I
will make up a step by step setup guide for you, and then later on I will
post it into the HRD forum and of course this one.
 If you have not done so have a look at the HRD forum it has heaps of info.
 I dont know why but HRD is hard the first time you ever set it up and use
it , but after you have done it a couple of times it is easy.
 In fact at home I run the Flex 5000a, an Icom IC-821H satellite rig
(VHF/UHF) and the old Icom IC-728 back up rig all from one running instance
of HRD with three tabs talk about easy peasy, It allows me to tune radios
via wireless on the laptop anywhere at home or if the computer and radios
left on via the net.
 As you might see I really love HRD and have been running it for a number of
years.
 I hope this helps a little , if not contact me off line, I might set up and
web link with step by step pictures on a web server, just let me know.
 Cheers and 73s'
 Paul
 VK5VCO
 Me, Myself and I  accepts no liability for the content of this E-Mail, or
for the consequences of any actions taken on the basis of the information
provided, unless that information is subsequently confirmed in writing. Any
views or opinions presented in this email are solely those of the author and
do not necessarily represent those of Me, Myself and I. 
 WARNING: Computer viruses can be transmitted via E-Mail. The recipient
should check this email and any attachments for the presence of viruses. Me,
Myself and I accepts no liability for any damage caused by any virus
transmitted by this E-Mail. 
 On Wed 17/02/10 12:48 PM , "Dave Beumer W0DHB" [email protected] sent:
 Could anyone tell me how to setup DM780 and PowerSDR to allow DM780 to key
CW (using KY commands I assume)  I couldn't find anything in the knowledge
base .
 Thanks
 Dave
 _______________________________________________
 FlexRadio Systems Mailing List
 [email protected] [1]
 http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
 Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
 Knowledge Base: http://kc.flex-radio.com/  Homepage:
http://www.flex-radio.com/ [2]
---- Message sent via Adam Internet WebMail  - http://www.adam.com.au/

Links:
------
[1] mailto:[email protected]
[2] http://www.flex-radio.com/
_______________________________________________
FlexRadio Systems Mailing List
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/  Homepage:
http://www.flex-radio.com/


_______________________________________________
FlexRadio Systems Mailing List
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/  Homepage: http://www.flex-radio.com/

Reply via email to