Well I got the UCB board kit together even with the limited assembly info I could find and now I have it hooked up for a test. I seem to get results every time I use one of my assigned band buttons but none of the activities change no matter what relay box I check in UCB setup tab. The UCB board has relay #1 and LED keyed with power applied and no data input. Since Phil K3TUF has failed to respond to my e-mails I would like to talk with someone out there who is running the UCB board with a Flex 5000A through DDUTIL. I would like to compare screen shots of the UCB , DDUTIL and transverter menus and try to find out if I have a problem or if I simply don't know how to set this thing up (this is obvious) I checked all the relay boxes for band #1 222 here and thought all relays should have been keyed. Nothing changes the UCB still keys realy #4 and a couple of the LED's DS2 and DS3 light up? Band #Ø 144 Mhz here keys relay#2 and lights up DS2 only with nothing checked on UCB setup. Band# 2 432 Mhz here keys relay# 8 and lights LEDS DS2 DS3 DS4. So basically things are happening but not what is supposed to.
More transverters waiting to be put into service here but things are looking a bit grim. 73, Bob KA9UVY _______________________________________________ FlexRadio Systems Mailing List [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
