Hi Ron - try the volume and fader sliders in the "MultiRX" box. They control the VAC audio. The vertical sliders control volume. If you have set up your VAC channels as stereo, be careful to set the faders (the horizontal sliders) to get the audio routed to the correct channel.
73, /Jack de K3FIV On Aug 4, 2011 4:36 PM, "Ronald G. Parsons" <[email protected]> wrote: > I am experimenting with ways to remotely control PSDR with the audio I/O transmitted via Skype connected to the VAC lines. I have the Skype audio options “Automatically adjust microphone/speaker settings” unchecked. > > The remote audio I/O device’s (currently an iPad 2) speaker and microphone levels, connected to PSDR (v. 2.1.5), are not affected by the PSDR AF slider (speaker output) nor by the PSDR Mic (USB) slider. > > It appears that the VAC audio comes from/goes to PSDR at a point which is not affected by the AF and Mic sliders. > > Is this correct? If so, is there a way to control the amplitude of the VAC channels via the AF and Mic sliders or some other control? > > Ron W5RKN > _______________________________________________ > FlexRadio Systems Mailing List > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ _______________________________________________ FlexRadio Systems Mailing List [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
