I had the same issue the other day and did a hardware reset .. Basically
make sure you have no power going to the radio for 10 or 15 seconds.
Worked wonders on mine. Now I always turn it off then turn off my power
supply.
Craig
On Sun, Jan 8, 2012 at 5:06 PM, [email protected] wrote:
Shutting down psdr and restarting has no effect.
It is dependent on signal strength. I only notice it on signals over
S9.
73
Wayne
On Sun, Jan 8, 2012, at 03:41 PM, Ross Stenberg wrote:
Could be the ugly return of "The Grunge"
On 1/8/2012 1:03 PM, [email protected] wrote:
I'm getting a popping sound on ssb receive. It only happens on the
peaks with strong signals.
Tried different agc settings and different phone rx buffer sizes -
no
effect.
Running 2.2.3 on a Neal Windows 7/64 super computer.
Any suggestions appreciated.
Thanks and 73
Wayne
_______________________________________________
FlexRadio Systems Mailing List
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage:
http://www.flexradio.com/
_______________________________________________
FlexRadio Systems Mailing List
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage:
http://www.flexradio.com/
_______________________________________________
FlexRadio Systems Mailing List
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
