Mark, I just sent you an e-mail with a copy of the article I wrote on using rack gear, please let me know if it works for you. I had the same spike problem and resolved it using these settings.
Craig -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mark Weidhaas Sent: Thursday, February 23, 2012 9:20 PM To: [email protected] Subject: [Flexradio] Behringer DEQ2496 RFI Spikes I have been trying to integrate a Behringer DEQ2496 into my audio chain with my Flex 5000A. My shack is on the second floor of my house so RFI is a constant problem. Using only my Behringer Xenyx802 mixer board and my 5000A there are no major RFI problems. I have isolated the 802 from the ballanced line input on the 5000A with a Jensen JT-11P-1 audio transformer. When I add the DEQ2496 I get an RFI spike at about 2~3 Hz. I can see the spike on both the 5000A panadapter and on an oscilloscope tapped at my 811H amp output. I have tried various audio isolation techniques but no joy. The spiking is the most pronounced with the amp on. Has anyone encountered this issue and solved this problem ? if so please advise. Mark Weidhaas W7MGW TRA 11810 / NAR 87698 / L3 Mobile: (602) 300-5114 [email protected] _______________________________________________ FlexRadio Systems Mailing List [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
