I did find this on the WSPR forum that I will have to give a try to. Worst case, is I will try using 2 hardware ports and a cable.
Mike va3mw *From another thread by OE1MSB....* *Menu -> Setup -> Station Parameters -> Handshake* *Select "Hardware" and add "-C write_delay=0" so that this is shown: Hardware -C write_delay=0* *That worked on my Flex3000....... worth a try... 73 Roger G0IUW* On Wed, Mar 14, 2012 at 10:47 AM, Michael Walker <[email protected]>wrote: > Thanks Tony > > That is exactly what I am seeing. PTT works, but that is it. > > I want to use it for FMT coming up in April. > > Mike va3mw > > > On Wed, Mar 14, 2012 at 10:36 AM, Tony Estep <[email protected]> wrote: > >> On Wed, Mar 14, 2012 at 9:18 AM, Michael Walker <[email protected]> >> wrote: >> >> > Has anyone had any issues getting WSPR to talk to the CAT port on the >> 3000? >> ===================== >> Mike, I haven't been able to get it to automatically set the xmit >> frequency when I click on the Band selector, as it should do and does >> do with other radios. However, the PTT via the CAT port works okay. So >> I just set the frequency manually and after that everything works >> fine. >> >> Tony KT0NY >> >> >> >> -- >> http://www.isb.edu/faculty/facultydir.aspx?ddlFaculty=352 >> >> _______________________________________________ >> FlexRadio Systems Mailing List >> [email protected] >> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >> Knowledge Base: http://kc.flexradio.com/ Homepage: >> http://www.flexradio.com/ >> > > _______________________________________________ FlexRadio Systems Mailing List [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
