Hi Ron,
I run full duplex on my Flex-5000 with SatPC32. I have the second RX in
my Flex. I do not have the VHF/UHF module in my Flex. I use external
transverters and converters. There is a quirk or two in that I have to
manually select the downlink mode after attaching the Flex to Sat-PC32
rig control. Once the mode is correct the rig tracks correctly for both
uplink and downlink. My first tests were to track the beacons on the
satellites. They tracked perfectly.
As the other fellow said, what specific issues are you having? I would
be happy to speak with you via telephone if it would help.
73,
Bill
NJ1H
On 8/28/2012 6:09 PM, Ronald G. Parsons wrote:
I have been trying to use SatPC32 and Ham Radio Deluxe with PowerSDR 2.3.5
using both CAT ID = PowerSDR and CAT ID = TS-2000.
I have encountered problems with both of these.
What satellite control programs are you satellite Flexer’s using with the FLEX
radios?
Ron W5RKN
_______________________________________________
FlexRadio Systems Mailing List
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
_______________________________________________
FlexRadio Systems Mailing List
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
