That's what I am using here Neal....4SQ of the Hi-4+ amplifiers with
24ft verticals spaced at 60ft/side....that's all I could fit.



On 4/23/13, Neal Campbell <[email protected]> wrote:
> I have ordered one of the Hi-Z single verticals with their premium preamp
> and voltage injector to see how it works. The vertical is abt 23' so its
> not very large. We have a 9 array 160m receiving array at NR4M that
> performs "like buttah" (as Barbra Streisand would say).
>
> It might be a tad weak in the 30-6m region but it cannot be any weakter
> than my Steppir!
>
> 73
> Neal Campbell
> Owner
> Abroham Neal LLC
> Work:    +1 540 645 5394
> Mobile:  +1 540 645 8171
>
>
>
> On Tue, Apr 23, 2013 at 1:28 PM, Rick McClelland, AA5S
> <[email protected]>wrote:
>
>> Greg,  I agree one should be careful not to overload the receiver while
>> transmitting on a nearby antenna but my question is whether the preamp on
>> these antennas are either unnecessary or degrade system performance when
>> discerning low level signals with the 6700's receiver.
>>
>> On Tue, Apr 23, 2013 at 11:23 AM, Greg <[email protected]> wrote:
>>
>> > I would connect it to the radio through an RF limiter like the ones
>> > formerly sold by ICE and now sold by Array Solutions....just to be
>> > safe.
>> >
>> > http://www.arraysolutions.com/Products/as_rxfep.htm
>> >
>> >
>> > BTW....If anyone is interested, I have one of the Clifton Labs
>> > versions available (without the stinger) for only $50.  I had two of
>> > them phased with the DXE NCC-1 but now I have the Hi-Z 4SQ array.  I
>> > still  use one of the Clifton Labs antennas but the other one is just
>> > sitting here.
>> >
>> > http://cliftonlaboratories.com/z1501_active_antenna.htm
>> >
>> >
>> > 73
>> > Greg
>> >
>> >
>> > On 4/23/13, Rick McClelland, AA5S <[email protected]> wrote:
>> > > Does anyone have any thoughts at to whether active receive antennas
>> such
>> > as
>> > > DX Engineering's Active Antenna Phasing Systems AAPS3-1P (
>> > > http://www.dxengineering.com/parts/dxe-aaps3-1p) or Pixel
>> Technologies'
>> > > Shortwave Magnetic Loop Antenna RF Pro-1B (
>> > > http://www.pixelsatradio.com/product/shortwave-magnetic-loop-antenna/)
>> > will
>> > > perform well with the Flex 6700?  I'm curious based on recent
>> > > comments
>> > > posted here regarding the 6700's very low noise performance receiver.
>> > > These comments make me wonder if the the preamps included with these
>> > > antennas would decrease system performance when used with this
>> receiver.
>> > > _______________________________________________
>> > > Flexedge mailing list
>> > > [email protected]
>> > > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
>> > > This is the FlexRadio Systems e-mail Reflector called FlexEdge.  It
>> > > is
>> > used
>> > > for posting topics related to SDR software innovation and other
>> technical
>> > > SDR topics.
>> > >
>> >
>> > _______________________________________________
>> > FlexRadio Systems Mailing List
>> > [email protected]
>> > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>> > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>> > Knowledge Base: http://kc.flexradio.com/  Homepage:
>> > http://www.flexradio.com/
>> >
>>
>>
>>
>> --
>> Rick McClelland, AA5S
>> Fort Collins, CO
>> _______________________________________________
>> FlexRadio Systems Mailing List
>> [email protected]
>> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
>> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
>> Knowledge Base: http://kc.flexradio.com/  Homepage:
>> http://www.flexradio.com/
>>
>

_______________________________________________
FlexRadio Systems Mailing List
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/  Homepage: http://www.flexradio.com/

Reply via email to