Not directly related, but I have a Chigo ductless mini-split here in the
shack. The problem that I had with it is that in cool mode, the fan is
always running while the compressor turns on and off as necessary. It has a
handheld remote control, so I figured out (with a LOT of Internet help) the
IR coding to turn the whole unit on and off. I now have an Arduino with a
small temperature probe that turns the Chigo on at a programmable
temperature, and turns it off at a lower settable temp.
I'm still playing with the user interface software. I'm using a 2x16 LCD
and five switches, similar to the popular Arduino LCD shields. I can
provide some info if anyone is interested.
73, Terry, WB4JFI
-----Original Message-----
From: Jon Hall
Sent: Wednesday, June 19, 2013 1:23 PM
To: [email protected]
Subject: Re: [Flexradio] Flex 5000A and RFI
I have two of the Mitsubishi split heat pump/AC units installed in the
building with my shack. I tried turning them on and off and can't see any
difference in noise levels.
Jon...kf2e
_______________________________________________
FlexRadio Systems Mailing List
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage:
http://www.flexradio.com/
_______________________________________________
FlexRadio Systems Mailing List
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
