I have seen 2 instances where DDU was drawing excessive CPU utilization (like 90%) and it obviously was stressing the system to the point that anything with a DPC had to wait a long while to getr control back.
I replaced DDU2 with DDU3 and the problems were fixed. 73 Neal Campbell Abroham Neal LLC On Tue, Mar 11, 2014 at 7:35 PM, Keith Watson <[email protected]> wrote: > Is it possible that DDUtil could be involved with this issue? When I bypass > DDUtil, everything seems to work as expected. However, I can't understand > how this utility would cause a problem with the audio. > > Keith... > N9TX > > > On Tue, Mar 11, 2014 at 8:50 AM, Bret Mills <[email protected]> wrote: > > > Maker sure your on the correct sideband for the digital mode your using > > AND your VAC levels are set correctly, ie. The FLDigi or DM780 waterfall > > should be a medium blue color and the signals are yellow using the > default > > screen colors, on my radio this is about -24 on the VAC control, make > sure > > when you transmit you adjust your audio levels as well. > > 73's > > Bret > > WX7Y > > > > > > > > On Mon, Mar 10, 2014 at 8:40 PM, Keith Watson <[email protected] > >wrote: > > > >> I believe it is a little more basic than that. I tried FLDigi and MMVari > >> and they all show the same symptom when coping PSK31. > >> > >> Keith... > >> > >> > >> On Mon, Mar 10, 2014 at 9:11 PM, John Swink <[email protected]> wrote: > >> > >> > Keith, > >> > I never could get DM780 to work with my Flex 5000A so I switched to > >> Fldigi. > >> > It runs all digital modes except WSJT with no problems. > >> > > >> > 73, > >> > John, N8WNA > >> > > >> > -----Original Message----- > >> > From: FlexRadio [mailto:[email protected]] On Behalf > Of > >> > Keith > >> > Watson > >> > Sent: Monday, March 10, 2014 9:33 PM > >> > To: [email protected] > >> > Subject: [Flexradio] Using Digital Master 780 with Flex 5000a > >> > > >> > Just when I think I got everything worked out, I figure out that I > >> don't. > >> > Tried to run some PSK31 for the first time this evening using DM780. > >> > However, I realize that it is not decoding worth a darn. Very strong > >> > signals > >> > that should print 100 percent are only printing about 20 percent if > >> that. I > >> > figured I had the sample rate set wrong for this program in PSDR, but > >> any > >> > change to it does not seem to make much of a difference or make it > >> worse. I > >> > figure I am doing something dumb, but I have not figured out that it > is > >> > yet. > >> > Thanks. > >> > > >> > Latest version of PDSR. > >> > VAC 4.13 > >> > HRD 6.1.4 > >> > > >> > Keith... > >> > N9TX > >> > _______________________________________________ > >> > FlexRadio Systems Mailing List > >> > [email protected] > >> > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > >> > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > >> > Knowledge Base: http://kc.flexradio.com/ Homepage: > >> > http://www.flexradio.com/ > >> > > >> > > >> _______________________________________________ > >> FlexRadio Systems Mailing List > >> [email protected] > >> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > >> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > >> Knowledge Base: http://kc.flexradio.com/ Homepage: > >> http://www.flexradio.com/ > >> > > > > > _______________________________________________ > FlexRadio Systems Mailing List > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: > http://www.flexradio.com/ > _______________________________________________ FlexRadio Systems Mailing List [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
