Thanks, Graham
Jerry W4UK
At 12:06 PM 5/19/2014, Graham Haddock wrote:
Jerry:
Yes.
When the radio boots, the current software will auto-detect the
presence of an external 10 MHz
reference input that is above the minimum input level and use it
instead of the internal OCXO (6700)
or internal TCXO (6500).
It does this at boot time, so if you apply the 10 MHz input after
the unit is already running, it won't use
the external input until the next re-boot.
If the radio is using the external input, and you remove it during
operation, the radio will fall back to
the internal reference within one second. If the external 10 MHz
then re-appears, it will not be used
until the next re-boot.
--- Graham / KE9H
==
On Mon, May 19, 2014 at 10:46 AM, Jerry Flanders
<<mailto:[email protected]>[email protected]> wrote:
And the external GPS can be used with present software, right?
Jerry W4UK
At 10:59 AM 5/19/2014, Graham Haddock wrote:
Hi Jerry:
The 6700 has an external 10 MHz input on the rear panel. It is an
RCA jack on the upper left
side of the RCA jack cluster on the rear of the radio.
Input level specs are +4 dBm (1.0V) minimum, to +15 dBm maximum.
If you would like to download the hardware reference manual for this product,
please go to our website, and look under "Documentation"
73's
--- Graham / KE9H
==
On Mon, May 19, 2014 at 9:46 AM, Jerry Flanders
<<mailto:[email protected]>[email protected] > wrote:
In the 6700 rear panel views, I don't see any input for an external
10 MHz GPS reference. I already have a Trimble Thunderbolt unit I
use with my 5000 and would like to use it with a 6700.
Do I have to get the Flex GPS option to get GPS stability?
Jerry W4UK
_______________________________________________
FlexRadio Systems Mailing List
<mailto:[email protected]>[email protected]
To opt out of the Reflector:
<http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz>http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
_______________________________________________
FlexRadio Systems Mailing List
[email protected]
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
