I have made a few changes to the gps-nav tutorial for the b1900d. Mostly
typos.
Macnab
<PropertyList>
<name>GPS Navigation</name>
<description>GPS waypoint navigation how-to</description>
<interval>2</interval>
<init>
<set>
<property>instrumentation/gps/wp/wp[1]/ID</property>
<value></value>
</set>
<set>
<property>instrumentation/gps/serviceable</property>
<value>0</value>
</set>
</init>
<step>
<message>
Make sure aircraft is running... power on.{|.}
Press power button on the GPS unit{|.}
</message>
<view>
<heading-offset-deg>322.2</heading-offset-deg>
<pitch-offset-deg>-22.2</pitch-offset-deg>
<field-of-view>10</field-of-view>
</view>
<error>
<message>Power up the GPS{|.}
Nav 1 page will display{|.}
</message>
<condition>
<equals>
<property>systems/electrical/outputs/gps</property>
<value>0</value>
</equals>
</condition>
</error>
<exit>
<condition>
<greater-than>
<property>systems/electrical/outputs/gps</property>
<value>0</value>
</greater-than>
</condition>
</exit>
</step>
<step>
<message>
Open Equipment/GPS Settings.{|.}
Select a waypoint type , and enter the ID.{|.}
Press DTO.{|.}
Close the dialog
</message>
<view>
<heading-offset-deg>322.2</heading-offset-deg>
<pitch-offset-deg>-22.2</pitch-offset-deg>
<field-of-view>12</field-of-view>
</view>
<error>
<message>
Enter waypoint type and ID in the Equipment/GPS dialog.{|.}
Waypoint ID will appear at the top of the NAV1 page{|.}
when active{|.}
<!-- Currently it won't, due to a reported bug. Bug ID 933 -->
</message>
<condition>
<equals>
<property>instrumentation/gps/wp/wp[1]/ID</property>
<value></value>
</equals>
</condition>
</error>
<exit>
<condition>
<not-equals>
<property>instrumentation/gps/wp/wp[1]/ID</property>
<value></value>
</not-equals>
</condition>
</exit>
</step>
<step>
<message>
Press the GPS CRS button ON/OFF/ON until GPS heading appears on the HSI{|.}
</message>
<view>
<heading-offset-deg>357.3</heading-offset-deg>
<pitch-offset-deg>-23.4</pitch-offset-deg>
<field-of-view>25</field-of-view>
</view>
<error>
<message>
Press GPS CRS again{|.}
GPS heading will display on the HSI when GPS mode enabled.{|.}
</message>
<condition>
<not>
<property>instrumentation/nav/slaved-to-gps</property>
</not>
</condition>
</error>
<exit>
<condition>
<property>instrumentation/nav/slaved-to-gps</property>
</condition>
</exit>
</step>
<step>
<message>
Open Autopilot dialog (F11),and adjust HEADING{|.}
to match COURSE.{|.}
and white "TO" arrow appears{|.}
</message>
<view>
<heading-offset-deg>0.45</heading-offset-deg>
<pitch-offset-deg>-30</pitch-offset-deg>
<field-of-view>12</field-of-view>
</view>
<error>
<message>
Adjust HEADING setting.{|.}
</message>
<condition>
<and>
<greater-than>
<property>instrumentation/flightdirector/hsi/crs-deflection</property>
<value>0.1</value>
</greater-than>
<less-than>
<property>instrumentation/flightdirector/hsi/crs-deflection</property>
<value>-0.1</value>
</less-than>
<not>
<property>instrumentation/flightdirector/hsi/to-flag</property>
</not>
</and>
</condition>
</error>
<exit>
<condition>
<and>
<less-than>
<property>instrumentation/flightdirector/hsi/crs-deflection</property>
<value>0.1</value>
</less-than>
<greater-than>
<property>instrumentation/flightdirector/hsi/crs-deflection</property>
<value>-0.1</value>
</greater-than>
<property>instrumentation/flightdirector/hsi/to-flag</property>
</and>
</condition>
</exit>
</step>
<step>
<message>
Set your desired cruise altitude{|.}
For this tutorial , set to 15000 ft{|.}
</message>
<view>
<heading-offset-deg>334</heading-offset-deg>
<pitch-offset-deg>-24</pitch-offset-deg>
<field-of-view>7</field-of-view>
</view>
<error>
<message>
Change altitude by clicking on knob{|.}
Set to 15000 ft{|.}
</message>
<condition>
<not-equals>
<property>instrumentation/flightdirector/Asel</property>
<value>15000</value>
</not-equals>
</condition>
</error>
<exit>
<condition>
<equals>
<property>instrumentation/flightdirector/Asel</property>
<value>15000</value>
</equals>
</condition>
</exit>
</step>
<step>
<message>
Press the "HDG" and "ALTS" buttons on the {|.}
FlightDirector controller{|.}
</message>
<view>
<heading-offset-deg>0</heading-offset-deg>
<pitch-offset-deg>-18</pitch-offset-deg>
<field-of-view>15</field-of-view>
</view>
<error>
<message>Press HDG and ALTS buttons.Pink command{|.}
bars will appear on the EADI when modes are armed/{|.}
</message>
<condition>
<and>
<not-equals>
<property>autopilot/locks/heading</property>
<value>NAV</value>
</not-equals>
<not-equals>
<property>autopilot/locks/altitude</property>
<value>ASEL</value>
</not-equals>
</and>
</condition>
</error>
<exit>
<condition>
<and>
<equals>
<property>autopilot/locks/heading</property>
<value>HDG</value>
</equals>
<equals>
<property>autopilot/locks/altitude</property>
<value>ASEL</value>
</equals>
</and>
</condition>
</exit>
</step>
<end>
<message>
Once airborn , gear and flaps up,{|.}
press the Autopilot "Engage" button on the controller{|.}
on the pedestal ...(between the seats){|.}
NOTE: Press the GPS CRS button OFF to return to NAV mode.{|.}
for ILS / VOR navigation{|.}
</message>
<view>
<heading-offset-deg>0</heading-offset-deg>
<pitch-offset-deg>-15</pitch-offset-deg>
<field-of-view>60</field-of-view>
</view>
</end>
</PropertyList>
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_nov
_______________________________________________
Flightgear-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/flightgear-devel
