Thanks Erik, Yes, this worked. It took me awhile to figure out that the code I had modified was taken out because its function was replaced by the definitions in the xxx-sound.xml files. I wanted to make the wind sound stronger and more dependent on the airspeed. My test pilot told me I ought to make it dependent on beta, too, because sailplanes get much noisier when sideslipping.
Mark -----Original Message----- From: Erik Hofman [mailto:[EMAIL PROTECTED]] Sent: Friday, March 01, 2002 2:45 AM To: [EMAIL PROTECTED] Subject: Re: [Flightgear-devel] lost sounds Curtis L. Olson wrote: > Boslough, Mark B writes: > >>what happened to many of the sounds? I just updated >>to the current cvs and there is no longer wind, cranking, >>etc. Was that capability removed? I checked Sound/fg_fx.cxx >>and much of the code has been taken out. Was it put >>somewhere else or is it gone? >> > > I noticed that the right engine on the dc3 has no sound effects > either. That's because of the way the model loader works. Since the dc doesn't have a specific sound configuration file (yet), it inherrits that of the c172. For some models David seems to have disabled sound (or was already the case?) Mark, which aircraft are you talking about, is it your own? If so you should change the SGS-set.xml file the following way: <sound>true</sound> should become: <sound> <audible>true</audible> <path>Aircraft/SGS/sgs-sound.xml</path> </sound> And you should copy the Aircraft/c172/c172-sound.xml file to Aircraft/SGS/sgs-sound.xml Now you could remove the <crank> and <engine> sections because it's a sail plane :-) Erik _______________________________________________ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel _______________________________________________ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel
