Alex Romosan wrote: > just took a look at the outside view with the cessna and i noticed you > can see the instrument panel through the fuselage. this is on linux > with a geforce card. picture at:
What size depth buffer are you using? The default is to use the same depth as the color bits, so if you're in 16 bit color mode, you're probably using a shallow depth buffer. You could try a depth of 24 in your XF86Config-4 file, and see if that fixes it -- I don't see this behavior under XFree with either a GeForce 2MX or GeForce 3. Right now, there's a very large offset placed between layers of the panel, which can bleed through on shallow depth buffers. When the jitterbug (which causes the panel layers to jitter "through" each other) is fixed, this can hopefully be reduced to a point where it is invisible on most hardware. Andy -- Andrew J. Ross NextBus Information Systems Senior Software Engineer Emeryville, CA [EMAIL PROTECTED] http://www.nextbus.com "Men go crazy in conflagrations. They only get better one by one." - Sting (misquoted) _______________________________________________ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel
