Hi all, My copy of FGFS shows all the information below in the property browser, but only exports the value of 0 ... I then checked any of the other properties, and they export just fine ... I also tried the telnet route, and exactly the same happened ... do you have any ideas how I can fix it ?
> I've started basic GPS support under in /instrumentation/gps/. Right > now, the GPS publishes the following properties: > > /instrumentation/gps/raim > /instrumentation/gps/indicated-latitude-deg > /instrumentation/gps/indicated-altitude-ft > /instrumentation/gps/indicated-track-true-deg > /instrumentation/gps/indicated-track-magnetic-deg > /instrumentation/gps/indicated-ground-speed-kt > > I'm not sure whether the advanced navigation features (waypoints and so > on) belong here or in a higher-level module. I'm not simulating errors > and loss of satellites yet (position and altitude are always accurate), > but the 'raim' property provides a future placeholder for us to do so. > > To try it out, browse to /instrumentation/gps/ in the property browser > and watch the properties update as you fly (it's especially > interesting to do so at high altitude and compare the groundspeed to the > indicated airspeed). > > Perhaps, for a start, someone would like to throw together a very > simplistic GPS display based on these properties so that we can stick it > onto some panels. > > > All the best, > > > David > > -- > David Megginson, [EMAIL PROTECTED], http://www.megginson.com/ > > _______________________________________________ > Flightgear-devel mailing list > [EMAIL PROTECTED] > http://mail.flightgear.org/mailman/listinfo/flightgear-devel _______________________________________________ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel
