|
Greetings, I have 2 problems, one with the tar file and the other with
the program stopping on the XML. I have a SUN ultra2 2200 3D creator with Solaris 9, Open GL
1.2.3 and have installed the ready to run Flightgear 0.9.3 with the base pak. I start it up and a Xwindow appears with a picture of the Flightgear
title and a airplane. The command tool window stops on the xml part of the
electrical system of a 172 or any other aircraft I pick. It seems like the “XML”
part has a problem. -- Initializing Interpolator for
/usr/local/FlightGear/Navaids/range.high Reading electrical system model from
/usr/local/FlightGear/Aircraft/c172/c172-electrical.xml -- One other thing, When I downloaded the base pack “fgfs-base-0.9.3.tar”
I tried the “gz” and the “bz2” file and kept getting a
checksum error when I tried to untar the file. --- x
FlightGear-0.9.3/data/Docs/source/FlightGearSchool/pics/start.jpg.gz, 64937
bytes, 127 tape blocks x
FlightGear-0.9.3/data/Docs/source/FlightGearSchool/pics/chap_basics_fundament,
0 bytes, 0 tape blocks tar: directory checksum error I had to use my PC with the bz2 uncompress utility and that
seemed to work but did give an error. I then zipped up the dir from the pc and
ftp’ed the zip file over and unzipped it on the SUN box. Does any one have any ideas on what I am doing wrong? Thanks Andy |
_______________________________________________ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel
