On Tuesday 12 October 2004 20:08, Horst J. Wobig wrote:
> Lee Elliott wrote:
> >On Monday 11 October 2004 10:37, Jon Stockill wrote:
> >>Martin Spott wrote:
> >>>Martin Spott wrote:
> >>>>This patch is great - it works and it significantly
> >>>>increases the frame rate on a simple Linux-PC (old 600 MHz
> >>>>PentiumIII with Radeon9200) from 4-5 to 7-8 fps on the
> >>>>default location,
> >>>
> >>>With the recent display list changes things now settle at
> >>>stable 10 fps. I'd like to express my thanks to everyone
> >>> who participated in this tremendous improvement(s) !
> >>
> >>crease + display list = WOW!
> >>
> >>I've gone from 3-4FPS at KSFO in the C172 to a rock solid 12
> >> - this seems to be limited by the instruments, because
> >> turning the view, or selecting an external view gets 25-35,
> >> even with all those models around. I've NEVER seen
> >> FlightGear run so smoothly.
> >>
> >>The fact that a forward cockpit view is so stable (it
> >> doesn't matter how many models you point the aircraft at)
> >> makes landings at KSFO really smooth, where they used to be
> >> almost impossible before because the frame rate was so
> >> unpredictable.
> >>
> >>Thanks to all who contributed.
> >
> >The crease patch works well for me here but the DList patch
> > seems to result in a consistent seg fault.
> >
> >I suspect it's due to the ATI Linux drivers for my Radeon
> > 9200.
> >
> >Can anyone else running Linux with a Radeon 9xxx series card,
> >using ATI's drivers confirm if it works for them?
> >
> >TIA
> >
> >LeeE
>
> Are you sure you use the latest simgear?
> makeDList() should now be in simgear/scene/model/model.cxx
>
> Horst

I'm a few days old - I'll re-fresh.

Thanks.

LeeE

_______________________________________________
Flightgear-devel mailing list
[EMAIL PROTECTED]
http://mail.flightgear.org/mailman/listinfo/flightgear-devel
2f585eeea02e2c79d7b1d8c4963bae2d

Reply via email to