I compiled 9.9 test version on my Thinkpad T42 (I'm on the road) and after loading the cloud file, it worked for the default Cessna. However, when I tried the Citation I got the following messages, and it would not take off. It also had a couple of the instruments on the left side o f the panel (clock and the one above it) that were largely obscured by gray lines. Couldn't do much else without a joystick, which is not where I am.
Hope this helps somebody, Rex fgfs --aircraft=Citation-II Dent: ..Dent: EHAMDent: .opening file: /usr/local/share/FlightGear/data/Navaids/carrier_nav.dat /usr/local/share/FlightGear/data/Navaids/TACAN_freq.dat RenderTexture Error: Couldn't find a suitable pixel format. open /dev/[sound/]dsp: Device or resource busy Audio initialization failed! WARNING: ssgLoadAC: Failed to open '/usr/local/share/FlightGear/data/Aircraft/c172r/Models/c172-dpm.ac' for reading Reading xml electrical system model from /usr/local/share/FlightGear/data/Aircraft/beech99/beech99-electrical.xml Failed to load electrical system model: /usr/local/share/FlightGear/data/Aircraft/beech99/beech99-electrical.xml netAddress::set: Resource temporarily unavailable Initialising callsign using 'Aircraft/Citation/Models/Citation-II.xml' _______________________________________________ Flightgear-devel mailing list [email protected] http://mail.flightgear.org/mailman/listinfo/flightgear-devel 2f585eeea02e2c79d7b1d8c4963bae2d
