On Thu, 8 Jun 2006 19:34:02 +0200, Arnt wrote in message <[EMAIL PROTECTED]>:
> On Thu, 08 Jun 2006 10:12:50 -0500, Curtis wrote in message > <[EMAIL PROTECTED]>: > > > Frederic Bouvier wrote: > > > libplibul.* is not found. By the way, --with-plib is not a valid > > > terragear configure option. Try this instead : > > > > > > $ CXXFLAGS=-I/opt/include LDFLAGS=-L/opt/lib ./configure <your > > > other option flags> > > ..ok. How do I point TerraGear ./configure (and make) to plib? > (Plib is in /opt): > http://80.239.32.252/terragear.configure.fails and > http://80.239.32.252/TerrorGear.config.log > > > Or possibly a bit simpler, try: > > > > $ ./configure --prefix=/opt > > ..see http://80.239.32.252/terrorgear.configure.fails and > http://80.239.32.252/TerraGear.config.log > > > If you use a consistent prefix for plib, simgear, openal, > > flightgear, and terragear, they should all be happy. > > > I've built the whole chain of tools in nonstandard locations this > > way. > > ..aye. I have openal, freealut, gts and newmat in /usr/lib as debs, > and point to them --with-gts=/usr/lib etc. > > > For what it's worth, --prefix=/opt implicitely adds /opt/include to > > the include path and /opt/lib to the library path. > > ..ok, but still ignores or fails to see plib there. > > ..thanks to Fred 'n Curt. ..just reload my urls if you see any ref to --enable-sp-fdms. :o) -- ..med vennlig hilsen = with Kind Regards from Arnt... ;o) ...with a number of polar bear hunters in his ancestry... Scenarios always come in sets of three: best case, worst case, and just in case. _______________________________________________ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
