I have been trying to move hotspots around and it seems that only a limited surface of the "instrument can be designated ... But I don't know what is the criterion... I guess I'll have to look into the source ... :o( Weell on the up side, at least I can read the source ;o)
> Message du 20/06/06 à 11h18 > De : "AJ MacLeod" <[EMAIL PROTECTED]> > A : [EMAIL PROTECTED], "FlightGear developers discussions" > <flightgear-devel@lists.sourceforge.net> > Copie à : > Objet : Re: [Flightgear-devel] Problem with Sukhoi 26 panel > > On Tuesday 20 June 2006 05:21, flying.toaster wrote: > > Here are the "main panel" file and the definition of the 3D plane that > > carries it > > I dunno though if it will be of some help since they are all linked to the > > same property (the starter) but at different locations > > These are probably fine - the one I'd be most interested in is side-panel.xml. > > I have made this mistake in the past: Assuming that if I had a hotspot panel > <w>500 and <h>1000, that the single <instrument> of the same <w> and <h> > containing the hotspot "actions" should be placed at <x>=0 and <y>=0. > > In other words, I assumed that the <instrument> placement was by its lower > left corner i.e. 0,0. This is apparently not the case - it's placed by its > centre, i.e. in the case above <x>250</x> and <y>500</y>. > > I'm sorry if the above isn't clear - but if you post the contents of > side-panel.xml we may be able to better see what's wrong. > > Cheers, > > AJ > > _______________________________________________ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
