Martin Spott wrote: > "wim van hoydonck" wrote: > > >> Whenever I look outside in fg, the framerate skyrockets to values >> around 300 which induce stutter in the simulation. >> >> A (partial) solution would be to increase /sim/model-hz in the >> internal properties browser, so that less time is available to render >> the outside visuals. >> > > Once there was a > > --prop:/sim/frame-rate-throttle-hz=<Number> > > flag, see if it still works for example by setting it to 30 or 60 Hz, > > Martin. > At last!! Martin you have cured my issue with this. I set mine at 85 Hz & the behavior is almost entirely gone. Smooth simulation. I had been getting insanely high frame rates (> 200) & rendering "stutter". Now the frame rates are in the vicinity of 90-100.
I posted this over on the user list but was told to go fix my X config. Tried everything I & Nvidia support people could think of with no luck. I did not GL sync to blank (doesnt seem to work with these drivers anyway). Im running Intel core 2 duo (E6600) with Nvidia GeForce 7600 GS based graphics card. ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
