On mer 19 décembre 2007, Maik Justus wrote: > Hi Gerard, > > gerard robin schrieb am 19.12.2007 15:51: > > On mer 19 décembre 2007, Maik Justus wrote: > >> Hi Gerard, > >> > >> gerard robin schrieb am 19.12.2007 14:44: > >>> Here Osprey with rotors all folded up, on elevator > >>> > >>> http://pagesperso-orange.fr/GRTux/Osprey_on_carrier.jpg > >>> > >>> I only got huge difficulties because, when the elevator get down ( mid > >>> position) the blades suddenly fall down ??? > >> > >> The problem is: The fdm itself does not support folding of the blades. > >> For the fdm the rotor is unfolded and vertical. When the elevator gets > >> down, the fdm detects a crash (rotor vs. ship). > >> > >>> Regards > >> > >> Maik > > > > Oh, yes i forgot that "feature" (sorry, i am more aware with JSBsim, > > where i can give any specific contact point, though no perfect). > > > > Thanks > > But it can be fixed quite easily: The fdm allows to tilt the whole > rotor. I just need to add tilting of the rotor in a vertical position > along the fuselage. Then the contact points are within and above the > fuselage. As I added the blade/ wing fold I was not thinking about the > elevators. I thought, the remaining contact points would never hurt. > > Maik >
Nice, because the Piasecki (both) , S-51, Lynx wants it, only the coming Puma could avoid it. -- Gérard http://pagesperso-orange.fr/GRTux/ ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel