dave perry wrote: > dave perry wrote: > >> Hi all, >> >> I searched this list for a change to trim initialization but did not >> find any. This is from the plib branch, essentially V1.0. >> >> I have initial values specified in the -set.xml file for >> /controls/flight/elevator-trim >> /controls/flight/aileron-trim >> /controls/flight/rudder-trim >> which are ignored and all three initialize to zero. >> >> I tried changing the values in preferences.xml and also tried using >> --prop:/controls/flight/elevator-trim=-0.25 >> etc. but the trims still start with 0.0 values. >> >> I checked all the .nas files for the AC and they are not initializing >> the trims. >> >> I have no ~.fgfsrc file. >> >> What else could be over riding all the above? >> >> >> > OK, with just > ,/bin/fgfs --aircraft= ... > the trims are not reset to zero. I was using fgrun-1.0.0. I will look > at what defaults it is using. > > Sorting through the options I had set in fgrun but on the command line, I could reproduce the zeroing of the trims from the command line.
The culprit is --enable-real-weather-fetch. Is there a reason that fetching the real weather (METAR) needs to initialize all the trims? - Dave P. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
