On Fri, 20 Mar 2009 04:24:42 +0100, Arnt wrote in message
<[email protected]>:
> ..now trying a ./maketg DOUPD ADDDEBUG NOPAUSE run to see
> if I get the same SG .configure failure as with ./makefg.
a...@a45:/opt/bygg/tg $ ll /opt/bygg/tg/tmp/templog7.txt
&&md5sum /opt/bygg/tg/tmp/templog7.txt
-rw-r--r-- 1 arnt arnt 24572 Mar 20 05:23 /opt/bygg/tg/tmp/templog7.txt
2a1afc5e55a54918b7c79da781efa6c7 /opt/bygg/tg/tmp/templog7.txt
a...@a45:/opt/bygg/tg $
..but it missed at least this OSG build stuff:
[ 80%] Building CXX object
src/osgPlugins/jp2/CMakeFiles/osgdb_jp2.dir/ReaderWriterJP2.o
Linking CXX shared module ../../../lib/osgPlugins-2.9.1/osgdb_jp2.so
[ 80%] Built target osgdb_jp2
[ 80%] Building CXX object
src/osgPlugins/exr/CMakeFiles/osgdb_exr.dir/ReaderWriterEXR.o
/opt/bygg/tg/OpenSceneGraph/src/osgPlugins/exr/ReaderWriterEXR.cpp:
In function 'unsigned char* exr_load(std::istream&, int*, int*, int*,
unsigned int*)':
/opt/bygg/tg/OpenSceneGraph/src/osgPlugins/exr/ReaderWriterEXR.cpp:103:
warning: unused variable 'channels'
/opt/bygg/tg/OpenSceneGraph/src/osgPlugins/exr/ReaderWriterEXR.cpp:
In member function 'bool ReaderWriterEXR::writeEXRStream(const
osg::Image&, std::ostream&, const std::string&) const':
/opt/bygg/tg/OpenSceneGraph/src/osgPlugins/exr/ReaderWriterEXR.cpp:252:
warning: unused variable 'intenalTextureFormat'
/opt/bygg/tg/OpenSceneGraph/src/osgPlugins/exr/ReaderWriterEXR.cpp:
In member function 'osgDB::ReaderWriter::ReadResult
ReaderWriterEXR::readEXRStream(std::istream&) const':
/opt/bygg/tg/OpenSceneGraph/src/osgPlugins/exr/ReaderWriterEXR.cpp:365:
warning: unused variable 'internalFormat'
Linking CXX shared module ../../../lib/osgPlugins-2.9.1/osgdb_exr.so
[ 80%] Built target osgdb_exr
--
..med vennlig hilsen = with Kind Regards from Arnt... ;o)
...with a number of polar bear hunters in his ancestry...
Scenarios always come in sets of three:
best case, worst case, and just in case.
Processing maketg, version 1.0.5a, of 2009-03-18, on Fri Mar 20 04:16:23 CET
2009, with command [DOUPD ADDDEBUG NOPAUSE], next
log=[/opt/bygg/tg/tmp/templog7.txt]
Checking 3 arguments ... [DOUPD ADDDEBUG NOPAUSE]
All aguments ok. Will process: [ PLIB OSG SG TG]
The script pauses for input of a 'y' frequently. Any other input, or none, and
it will exit.
Commands checked. Running [maketg] in [/opt/bygg/tg]. Continue?
Doing tool and package update... you will need to enter your PASSWORD
Installing build-essential make automake libtool autoconf
Installing libglut3-dev libopenal-dev libalut-dev libalut0 libopenal0a
libfltk1.1-dev
Installing libfltk1.1 zlib1g-dev zlib1g libwxgtk2.8-0 libwxgtk2.8-dev
Installing libjpeg62-dev libjpeg62 libxi-dev libxi6 libxmu-dev libxmu6
libboost-dev
Installing fluid gawk gettext
Installing gcc g++
Installing cmake cvs subversion cmake
package update... The following should NOT be required, but with the present
SG/FG it is!
Will do 'sudo apt-get install libopenthreads6'
Installing libopenthreads6
Added for terragear-cs...
Installing git-core curl
Installing xlibmesa-gl-dev freeglut3-dev glutg3-dev libglut3-dev xorg-dev
Installing libalut-dev zlib1g-dev
Installing libtiff4 libtiff4-dev libtiff-tools libtiff-opengl
Done tool and package update. Continue?
Processing PLIB ...
Done plib update.
Running autogen.sh in /opt/bygg/tg/plib... output to
/opt/bygg/tg/tmp/templog7.txt
Running aclocal
Running automake
Running autoconf
======================================
Now you are ready to run './configure'
======================================
Done PLIB autogen.sh. Proceed?
Running ./configure --prefix=/opt/bygg/tg/install/plib
--exec-prefix=/opt/bygg/tg/install/plib
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
includedir changed to ${prefix}/include/plib libdir is ${exec_prefix}/lib
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for a BSD-compatible install... /usr/bin/install -c
checking for ranlib... ranlib
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for X... libraries , headers
checking for gethostbyname... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking for pthread_create in -lpthread... yes
checking for glNewList in -lGL... yes
checking for dlclose in -ldl... yes
checking for ALopenport in -laudio... no
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking windows.h usability... no
checking windows.h presence... no
checking for windows.h... no
checking GL/gl.h usability... yes
checking GL/gl.h presence... yes
checking for GL/gl.h... yes
checking for pthread_exit in -lc_r... no
checking for socklen_t... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating src/js/Makefile
config.status: creating src/util/Makefile
config.status: creating src/sg/Makefile
config.status: creating src/sl/Makefile
config.status: creating src/psl/Makefile
config.status: creating src/ssg/Makefile
config.status: creating src/ssgAux/Makefile
config.status: creating src/fnt/Makefile
config.status: creating src/pui/Makefile
config.status: creating src/puAux/Makefile
config.status: creating src/pw/Makefile
config.status: creating src/net/Makefile
config.status: executing depfiles commands
PLIB configuration information:
Building FNT library: yes
Building JS library: yes
Building NET library: yes
Building PUI library: yes
Building puAux library: yes
Building SG library: yes
Building PSL library: yes
Building SL library: yes
Building SSG library: yes
Building ssgAux library: yes
Building PW library: yes
Building UTIL library: yes
Done PLIB configure. Proceed?
Done PLIB make. Continue to install?
Done all PLIB. Proceed?
Processing OpenSceneGraph ...
Doing OSG svn update ... moment ...
Done OSG svn update.
Done CO or UPD. Proceed with cmake?
NOTE WELL: Read the above CAREFULLY. It may contain warnings, and important
advice.
Done cmake 1. Proceed to cmake with definitions?
Running cmake -D CMAKE_BUILD_TYPE=Release -D CMAKE_CXX_FLAGS=-O3 -D
CMAKE_C_FLAGS=-O3 -D
CMAKE_INSTALL_PREFIX:PATH=/opt/bygg/tg/install/OpenSceneGraph .
Done cmake with definitions. Proceed to make?
Done make. Proceed to install?
WARNING: OSG directory [/opt/bygg/tg/install/OpenSceneGraph/lib64] does NOT
exist!
Done OSG. Proceed?
Processing simgear-cs ...
Doing SG update (git pull)... moment ...
Done SG update.
Done SG CO or UPD. Proceed with autogen.sh
Running autogen.sh in /opt/bygg/tg/simgear-cs... output to
/opt/bygg/tg/tmp/templog7.txt
Host info: Linux i686
automake: 1.10.1 (110)
Running aclocal
Running autoheader
Running automake --add-missing
Running autoconf
======================================
Now you are ready to run './configure'
======================================
Done SG autogen.sh. Proceed with configure?
Doing SG ./configure --prefix=/opt/bygg/tg/install/simgear-cs
--exec-prefix=/opt/bygg/tg/install/simgear-cs
--with-osg=/opt/bygg/tg/install/OpenSceneGraph
--with-plib=/opt/bygg/tg/install/plib --with-jpeg-factory
Doing SG ./configure --prefix=/opt/bygg/tg/install/simgear-cs
--exec-prefix=/opt/bygg/tg/install/simgear-cs
--with-osg=/opt/bygg/tg/install/OpenSceneGraph
--with-plib=/opt/bygg/tg/install/plib --with-jpeg-factory to
/opt/bygg/tg/tmp/templog7.txt...
checking for a BSD-compatible install... /usr/bin/install -c
checking for -p flag to install... yes
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for headless mode...
checking CXX...
checking CC...
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking for ranlib... ranlib
checking for a BSD-compatible install... /usr/bin/install -c -p
checking whether ln -s works... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
includedir changed to ${prefix}/include/simgear libdir is ${exec_prefix}/lib
Building with Norman's jpeg image factory support
checking for jpeg_start_compress in -ljpeg... yes
plib prefix is /opt/bygg/tg/install/plib
osg prefix is /opt/bygg/tg/install/OpenSceneGraph
checking for extra include and lib directories...
+ found /opt/bygg/tg/install/simgear-cs/include
+ found /opt/bygg/tg/install/simgear-cs/lib
+ found /opt/bygg/tg/install/plib/include
+ found /opt/bygg/tg/install/plib/lib
+ found /opt/bygg/tg/install/OpenSceneGraph/include
+ found /opt/bygg/tg/install/OpenSceneGraph/lib
+ found /opt/bygg/tg/install/OpenSceneGraph/bin
+ found /usr/X11R6/lib
+ found /usr/X11R6/bin
checking for X... libraries , headers
checking for gethostbyname... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking for library containing pthread_exit... none required
checking for library containing inet_addr... none required
checking for library containing socket... none required
checking for library containing cos... -lm
checking for library containing XCreateWindow... -lX11
checking for library containing XShmCreateImage... -lXext
checking for library containing XGetExtensionVersion... -lXi
checking for library containing IceOpenConnection... -lICE
checking for library containing SmcOpenConnection... -lSM
checking for library containing XtMalloc... -lXt
checking for library containing XmuLookupStandardColormap... -lXmu
checking for library containing glNewList... -lGL
checking for library containing gluLookAt... -lGLU
checking for library containing glutGetModifiers... -lglut
checking for library containing alGenBuffers... -lopenal
checking for library containing alutInit... -lalut
checking windows.h usability... no
checking windows.h presence... no
checking for windows.h... no
checking how to run the C++ preprocessor... g++ -E
checking plib/ul.h usability... yes
checking plib/ul.h presence... yes
checking for plib/ul.h... yes
checking for plib 1.8.5 or newer... yes
checking osg/Version usability... yes
checking osg/Version presence... yes
checking for osg/Version... yes
checking zlib.h usability... yes
checking zlib.h presence... yes
checking for zlib.h... yes
checking for ANSI C header files... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking getopt.h usability... yes
checking getopt.h presence... yes
checking for getopt.h... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking for memory.h... (cached) yes
checking for stdint.h... (cached) yes
checking for stdlib.h... (cached) yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking for sys/stat.h... (cached) yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking sys/timeb.h usability... yes
checking sys/timeb.h presence... yes
checking for sys/timeb.h... yes
checking for unistd.h... (cached) yes
checking values.h usability... yes
checking values.h presence... yes
checking for values.h... yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for mode_t... yes
checking whether time.h and sys/time.h may both be included... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking return type of signal handlers... void
checking for vprintf... yes
checking for _doprnt... no
checking for ftime... yes
checking for gettimeofday... yes
checking for timegm... yes
checking for memcpy... yes
checking for bcopy... yes
checking for mktime... yes
checking for strstr... yes
checking for rand... yes
checking for random... yes
checking for drand48... yes
checking for setitimer... yes
checking for getitimer... yes
checking for signal... yes
checking for GetLocalTime... no
checking for rint... yes
checking for getrusage... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating SimGear.spec
config.status: creating simgear/Makefile
config.status: creating simgear/version.h
config.status: creating simgear/compatibility/Makefile
config.status: creating simgear/compatibility/MIPSpro721/Makefile
config.status: creating simgear/compatibility/MIPSpro740/Makefile
config.status: creating simgear/bucket/Makefile
config.status: creating simgear/debug/Makefile
config.status: creating simgear/ephemeris/Makefile
config.status: creating simgear/io/Makefile
config.status: creating simgear/magvar/Makefile
config.status: creating simgear/math/Makefile
config.status: creating simgear/environment/Makefile
config.status: creating simgear/misc/Makefile
config.status: creating simgear/nasal/Makefile
config.status: creating simgear/props/Makefile
config.status: creating simgear/route/Makefile
config.status: creating simgear/scene/Makefile
config.status: creating simgear/scene/material/Makefile
config.status: creating simgear/scene/model/Makefile
config.status: creating simgear/scene/sky/Makefile
config.status: creating simgear/scene/tgdb/Makefile
config.status: creating simgear/scene/util/Makefile
config.status: creating simgear/screen/Makefile
config.status: creating simgear/serial/Makefile
config.status: creating simgear/sound/Makefile
config.status: creating simgear/structure/Makefile
config.status: creating simgear/threads/Makefile
config.status: creating simgear/timing/Makefile
config.status: creating simgear/xml/Makefile
config.status: creating simgear/simgear_config.h
config.status: simgear/simgear_config.h is unchanged
config.status: executing depfiles commands
Configure Summary
=================
Prefix: /opt/bygg/tg/install/simgear-cs
Debug messages: yes
Automake version: automake (GNU automake) 1.10.1
With JPEG Factory support
Threads: pthread lib found.
Done SG ./configure. Continue?
Done SG configure. Proceed with make?
Done SG make. Proceed to install?
SG all done. Continue?
FG is being skipped...
Doing TerraGear... and components...
Checking installation of newmat library, and headers..
Checking installation of gpc... in /usr/local/lib and /usr/local/include...
Checking for terragear-cs...
Doing TG update... moment ...
Done TG update.
Currently in folder /opt/bygg/tg/terragear-cs
Running autogen.sh in /opt/bygg/tg/terragear-cs... output to
/opt/bygg/tg/tmp/templog7.txt
Host info: Linux i686
automake: 1.10.1 (110)
Running aclocal
Running autoheader
Running automake --add-missing
Running autoconf
======================================
Now you are ready to run './configure'
======================================
Done TG autogen.sh. Proceed?
Doing TG ./configure --prefix=/opt/bygg/tg/install/terragear-cs
--exec-prefix=/opt/bygg/tg/install/terragear-cs
--with-osg=/opt/bygg/tg/install/OpenSceneGraph
--with-simgear=/opt/bygg/tg/install/simgear-cs
--with-plib=/opt/bygg/tg/install/plib, to log file... moment...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking for ranlib... ranlib
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln -s works... yes
SimGear prefix path is /opt/bygg/tg/install/simgear-cs
plib prefix is /opt/bygg/tg/install/plib
osg prefix is /opt/bygg/tg/install/OpenSceneGraph
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for gdal-config... no
checking for GDAL...... no
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking windows.h usability... no
checking windows.h presence... no
checking for windows.h... no
checking for extra include and lib directories...
+ found /opt/bygg/tg/install/terragear-cs/bin
+ found /opt/bygg/tg/install/simgear-cs/include
+ found /opt/bygg/tg/install/simgear-cs/lib
+ found /opt/bygg/tg/install/plib/include
+ found /opt/bygg/tg/install/plib/lib
+ found /opt/bygg/tg/install/OpenSceneGraph/include
+ found /opt/bygg/tg/install/OpenSceneGraph/lib
+ found /opt/bygg/tg/install/OpenSceneGraph/bin
+ found /usr/X11R6/lib
+ found /usr/X11R6/bin
checking for X... libraries , headers
checking for gethostbyname... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking for library containing inet_addr... none required
checking for library containing socket... none required
checking for library containing main... none required
checking for library containing cos... -lm
checking for library containing XCreateWindow... -lX11
checking for library containing XShmCreateImage... -lXext
checking for library containing XGetExtensionVersion... -lXi
checking for library containing IceOpenConnection... -lICE
checking for library containing SmcOpenConnection... -lSM
checking for library containing XtMalloc... -lXt
checking for library containing XmuLookupStandardColormap... -lXmu
checking for library containing glNewList... -lGL
checking for library containing gluLookAt... -lGLU
checking for library containing glutGetModifiers... -lglut
checking for TIFFOpen in -ltiff... yes
checking for ulInit in -lplibul... yes
checking how to run the C++ preprocessor... g++ -E
checking plib/sg.h usability... yes
checking plib/sg.h presence... yes
checking for plib/sg.h... yes
checking newmat/newmat.h usability... yes
checking newmat/newmat.h presence... yes
checking for newmat/newmat.h... yes
checking gpc.h usability... yes
checking gpc.h presence... yes
checking for gpc.h... yes
checking for ANSI C header files... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking getopt.h usability... yes
checking getopt.h presence... yes
checking for getopt.h... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking for memory.h... (cached) yes
checking for stdlib.h... (cached) yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking for sys/stat.h... (cached) yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking sys/timeb.h usability... yes
checking sys/timeb.h presence... yes
checking for sys/timeb.h... yes
checking for unistd.h... (cached) yes
checking for windows.h... (cached) no
checking winbase.h usability... no
checking winbase.h presence... no
checking for winbase.h... no
checking values.h usability... yes
checking values.h presence... yes
checking for values.h... yes
checking zlib.h usability... yes
checking zlib.h presence... yes
checking for zlib.h... yes
checking simgear/version.h usability... yes
checking simgear/version.h presence... yes
checking for simgear/version.h... yes
checking for proper simgear version... 0.3.8 or greater... yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking whether time.h and sys/time.h may both be included... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking for socklen_t... yes
checking return type of signal handlers... void
checking for vprintf... yes
checking for _doprnt... no
checking for ftime... yes
checking for gettimeofday... yes
checking for timegm... yes
checking for memcpy... yes
checking for bcopy... yes
checking for mktime... yes
checking for strstr... yes
checking for rand... yes
checking for random... yes
checking for setitimer... yes
checking for getitimer... yes
checking for signal... yes
checking for GetLocalTime... no
checking for rint... yes
checking for getrusage... yes
configure: creating ./config.status
config.status: creating VERSION
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating src/Include/Makefile
config.status: creating src/Airports/Makefile
config.status: creating src/Airports/GenAirports/Makefile
config.status: creating src/Airports/Utils/Makefile
config.status: creating src/BuildTiles/Makefile
config.status: creating src/BuildTiles/Clipper/Makefile
config.status: creating src/BuildTiles/GenOutput/Makefile
config.status: creating src/BuildTiles/Match/Makefile
config.status: creating src/BuildTiles/Triangulate/Makefile
config.status: creating src/BuildTiles/Main/Makefile
config.status: creating src/BuildTiles/Osgb36/Makefile
config.status: creating src/BuildTiles/Parallel/Makefile
config.status: creating src/Lib/Makefile
config.status: creating src/Lib/Array/Makefile
config.status: creating src/Lib/DEM/Makefile
config.status: creating src/Lib/e00/Makefile
config.status: creating src/Lib/Geometry/Makefile
config.status: creating src/Lib/HGT/Makefile
config.status: creating src/Lib/landcover/Makefile
config.status: creating src/Lib/Optimize/Makefile
config.status: creating src/Lib/Output/Makefile
config.status: creating src/Lib/Polygon/Makefile
config.status: creating src/Lib/poly2tri/Makefile
config.status: creating src/Lib/shapelib/Makefile
config.status: creating src/Lib/TriangleJRS/Makefile
config.status: creating src/Lib/vpf/Makefile
config.status: creating src/Prep/Makefile
config.status: creating src/Prep/DemChop/Makefile
config.status: creating src/Prep/DemInfo/Makefile
config.status: creating src/Prep/DemRaw2ascii/Makefile
config.status: creating src/Prep/E00Lines/Makefile
config.status: creating src/Prep/GSHHS/Makefile
config.status: creating src/Prep/MergerClipper/Makefile
config.status: creating src/Prep/Photo/Makefile
config.status: creating src/Prep/OGRDecode/Makefile
config.status: creating src/Prep/ShapeFile/Makefile
config.status: creating src/Prep/TGVPF/Makefile
config.status: creating src/Prep/Terra/Makefile
config.status: creating src/Prep/TerraFit/Makefile
config.status: creating src/Prep/Tower/Makefile
config.status: creating src/Prep/UserDef/Makefile
config.status: creating src/Utils/Makefile
config.status: creating src/Utils/cdrom/Makefile
config.status: creating src/Utils/download-map/Makefile
config.status: creating src/Utils/poly2ogr/Makefile
config.status: creating src/Include/config.h
config.status: src/Include/config.h is unchanged
config.status: executing depfiles commands
Configure Summary
=================
Prefix: /opt/bygg/tg/install/terragear-cs
Debug messages: yes
Check the above CAREFULLY! Do NOT proceed if you find 'configure aborted'!
It should end writing out the Makefile set...
The configure MUST find -lplibul, plib/sg.h, abort if 'no' found...
Use TGDEBUG to output all the configure to the LOG file
'/opt/bygg/tg/tmp/templog7.txt'
and/or read the config.log file carefully...
Done TG configure. Proceed?
Doing TG make...
Done TG make. Proceed to install?
Done TG
Doing FG data update... moment...
Done FG data update.
To repeat...
Done FG data...
------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
_______________________________________________
Flightgear-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/flightgear-devel
