seconded

Alan


From: UltraZexe Zexeonyo 
Sent: Tuesday, December 08, 2009 11:31 AM
To: flightgear-devel@lists.sourceforge.net 
Subject: [Flightgear-devel] Adjusting the Adjust View Distance


Hi all, I'm very new to this and so forgive me for my abrupt and mailing.  I 
was referred to this devel-list by Gijs as it may interest some of you.




Adjusting the 'Adjust View Distance'

I have a little different taste than others especially when it comes to the 
Point of View (POV) of the cockpit. Where most pilots like to fly with a POV of 
70- 80, I like to use 120. However, there is one problem with this, using a POV 
@ 120 causes the cockpit to look very very far away, making it almost 
impossible to see the instruments, unless of course you zoom it back up to a 
POV of 80. But you can fly using a POV @ 120 with no problem by adjusting the 
'Adjust View Distance' from the 'View' menu. Simply click the dial on the 
'Forward/backward' and stop where you like. For some planes, this works very 
well, for others, it's a disaster.

The issue: The Adjust View Distance dial is over-sensitive, if I want a view 
distance of '0', i would click on '0' but because it's so sensitive, I always 
over-shoot the '0' mark and always hit '1.0m' or '-0.9m'. The difference in 
view is dramatic and can be a major flying issue.

The solution: The problem is that the dial has a minimum of (-100) to a maximum 
of (100). The range of it is too large. We need to change the range to a 
smaller workable range, a good minimum and maximum is (-5m) to (5m). You could 
change it to (-1m) to (1m) if you wanted to. Where to change these variables? 
Go to Flightgear/data/GUI/dialog/pilot_offset. In the minimum and maximum field 
type in the new numbers, (-5m) and (5m) for Left and right, Up and Down, and 
Forward and Backwards. Save and quit. If you want the Adjust View Distance even 
more specific, decrease the range, so a good range would be (-1m) to (1m).

So, if the cockpit is too close or too far, but you don't want to change the 
POV, using the adjust view distance is a good way to solve the problem. Just 
make sure that the Adjust View Distance range is calibrated to your likings. I 
use (-1m) to (1m) to get the distance just right.

If you have any questions feel free to contact me via email.

-Zexe



--------------------------------------------------------------------------------
Windows LiveT Hotmail is faster and more secure than ever. Learn more. 


--------------------------------------------------------------------------------


------------------------------------------------------------------------------
Return on Information:
Google Enterprise Search pays you back
Get the facts.
http://p.sf.net/sfu/google-dev2dev



--------------------------------------------------------------------------------


_______________________________________________
Flightgear-devel mailing list
Flightgear-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/flightgear-devel
------------------------------------------------------------------------------
Return on Information:
Google Enterprise Search pays you back
Get the facts.
http://p.sf.net/sfu/google-dev2dev
_______________________________________________
Flightgear-devel mailing list
Flightgear-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/flightgear-devel

Reply via email to