> *as you said, LNAV doesn't follow a course, but you fixed it
> I'll commit tonight...
>
> *I couldn't dial a V/S unless the AP is engaged and V/S mode is engaged
> too. Is it supposed to be that way ?
>
Yes ... if I remeber right the digits shouldn't display at all until in V/S
/ FPA mode.
> I would expect to be able to dial a vertical speed while, for instance,
> holding altitude, then engage V/S to descent/climb at the desired rate.
>
Thats what the FLCH (flight level change ) and CLM/CON(climb control) are
meant for if I understand you correctly.Not yet implemented
This is an airliner , meant for point A to Point B flight , and most of this
is programmed in the FMS...
at least that's what Ive read to date ...could be wrong.
Maybe I missed something
Your using recent cvs ? I'll take another look , it worked fine a few days
ago...
*I didn't find a way to display a ADF needle
On the controller directly above the PFD , are 2 switches that say
ADF L / VOR L and ADF R / VOR R . these switch on pointers on the ND in MAP
mode.
*I couldn't display VOR R or ILS R, only L worked. not implemented yet ?
Only NAV 1 is used until I find the proper switching method.
*Is there really no radio stack on the board ?
Yes , but need a bit more researcg ... it doesnt use the comm1 comm2 nav1
nav2 method ....
I hope this all doesn't sound picky, I know the plane is in development, but
I wanted to point out those things I noticied.
Awesome plane besides this !! Thank you
On 26/01/2010 08:13, Pete Morgan wrote:
Attached is a patch that adds filters to the 777 autopilot's Heading, LNAV
and Altitude
Major bug is LNAV.
The 777 currently doesn't fly on a LNAV/CRS properly.
The aircraft ends up on the correct heading, but with no correction, ie
parallel to predicted path and not correcting. The values in the PID are
completely different to other observed aircraft, so am unsure what the
problem is atmo.
Also this warning message is output below, not sure when it starts but its
goes on forever
Warning: State::drawQuads(0, 58464) too large handle in remapping to ushort
glDrawElements. Warning:
State::drawQuads(0, 58468) too large handle in remapping to ushort
glDrawElements. Warning:
State::drawQuads(0, 58468) too large handle in remapping to ushort
glDrawElements. Warning:
State::drawQuads(0, 58468) too large handle in remapping to ushort
glDrawElements.
regards
pete
------------------------------------------------------------------------------
The Planet: dedicated and managed hosting, cloud storage, colocation
Stay online with enterprise data centers and the best network in the business
Choose flexible plans and management services without long-term contracts
Personal 24x7 support from experience hosting pros just a phone call away.
http://p.sf.net/sfu/theplanet-com
_______________________________________________
Flightgear-devel mailing list
flightgear-de...@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/flightgear-devel
>
> ------------------------------------------------------------------------------
> The Planet: dedicated and managed hosting, cloud storage, colocation
> Stay online with enterprise data centers and the best network in the
> business
> Choose flexible plans and management services without long-term contracts
> Personal 24x7 support from experience hosting pros just a phone call away.
> http://p.sf.net/sfu/theplanet-com
> _______________________________________________
> Flightgear-devel mailing list
> Flightgear-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/flightgear-devel
>
>
------------------------------------------------------------------------------
The Planet: dedicated and managed hosting, cloud storage, colocation
Stay online with enterprise data centers and the best network in the business
Choose flexible plans and management services without long-term contracts
Personal 24x7 support from experience hosting pros just a phone call away.
http://p.sf.net/sfu/theplanet-com
_______________________________________________
Flightgear-devel mailing list
Flightgear-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/flightgear-devel
