Would it be possible to sync JSBSim and flightgear? There are a couple of changes to JSBSim I'd like to get into the next flightgear:
New tags for the piston engine model: <boost-loss-factor> Allows a power penalty for boosting manifold pressure. This can be adjusted at run-time by changing the boostloss-factor property Associated properties: propulsion/engine[*]/boostloss-factor propulsion/engine[*]/boostloss-hp (read only) <man-press-lag> This tag will allow the engine's manifold pressure to change faster (or slower) than it currently does. <starter-rpm> <starter-torque> These two tags control the starter motor. Starter-torque is the 0 RPM twisting force and starter-rpm is where the RPM where the starter motor ceases to produce power. Associated properties: propulsion/engine[*]/starter-norm This property can be set to 0 to disable the starter motor, or set to a value to simulate a low battery or a booster cart. Finally, I exposed an extra property: propulsion/engine[*]/friction-hp This can be set to a high value to 'seize' an piston engine. Thanks, Ron ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel