On Sunday, November 04, 2012 09:49:25 James Turner wrote: > > Short reply since I'm at FSWeekend still - can reply in more detail > tomorrow. The most likely answer is that the route-manager or GPS is not > activated - activating GPS leg mode should set the route-manger mode > automatically, I think. > > Once that's done, simply passing within 0.1 (IIRC) will sequence the next > wp. > > James >
To be more precise, the gps sequencing problem only appears at the second waypoint in the list. With loglevel info, I get the following messages at waypoint #1: GPS doing overflight sequencing 'saw current WP changed, now 1' GPS waypoint index is now 1 current waypt has altitude set, setting on AP route manager, current-wp is now 1 At waypoint #2, the ufo starts circling, and the console is swamped with this message: "already done @ WayptController::setDone" Any ideas? Thanks, Adrian ------------------------------------------------------------------------------ LogMeIn Central: Instant, anywhere, Remote PC access and management. Stay in control, update software, and manage PCs from one command center Diagnose problems and improve visibility into emerging IT issues Automate, monitor and manage. Do more in less time with Central http://p.sf.net/sfu/logmein12331_d2d _______________________________________________ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
