OK: Beeping start about this time: (probably after 'From file sounds sample = D:/Games/FlightGear/data/ATC/default.wav' is displayed)
Initializing OpenAL sound manager Adding subsystem fx ATC Display ATC Manager WARNING - INVALID type found in D:/Games/FlightGear/data/ATC/default.atis WARNING - INVALID type found in D:/Games/FlightGear/data/ATC/default.tower WARNING - INVALID type found in D:/Games/FlightGear/data/ATC/default.ground WARNING - INVALID type found in D:/Games/FlightGear/data/ATC/default.approach >From file sounds sample = D:/Games/FlightGear/data/ATC/default.wav Opened word data file ATC/default.vce OK... ATC Transmissions Current Unix calendar time = 1106119421 warp = 0 Current GMT = 1/19/2005 7:23:41 ATC Dialog System AI Manager Searching for airport code = KEMT Position for KEMT is (-118.035, 34.086) Mapping KEMT to bucket 1007363 Finding position for airport: KSFO Searching for airport code = KSFO Position for KSFO is (-122.375, 37.6188) Finding position for airport: KSFO Searching for airport code = KSFO Position for KSFO is (-122.375, 37.6188) AI Model Manager Adding subsystem ai_model Adding subsystem Traffic Manager Adding subsystem instrumentation Adding subsystem systems Initializing Interpolator for D:/Games/FlightGear/data/Navaids/range.term Initializing Interpolator for D:/Games/FlightGear/data/Navaids/range.low Initializing Interpolator for D:/Games/FlightGear/data/Navaids/range.high Initializing Interpolator for D:/Games/FlightGear/data/Navaids/range.term Initializing Interpolator for D:/Games/FlightGear/data/Navaids/range.low Initializing Interpolator for D:/Games/FlightGear/data/Navaids/range.high Initializing Interpolator for D:/Games/FlightGear/data/Navaids/range.term Initializing Interpolator for D:/Games/FlightGear/data/Navaids/range.low Initializing Interpolator for D:/Games/FlightGear/data/Navaids/range.high In memory sounds sample In memory sounds sample In memory sounds sample Failed to remove nav-vor-ident sound Failed to remove nav-vor-ident sound Attempt to set archive flag for non-existant property /radios/kt-70/inputs/rotat ion-deg Initializing cockpit subsystem Initializing current aircraft HUD Read properties for Default Aircraft Hud Reading Hud instruments Reading Instrument hudladder from D:/Games/FlightGear/data/Aircraft/B-52F/Huds/B -52F-hudladder.xml Done reading instrument Pitch Ladder Reading Instrument hudcard from D:/Games/FlightGear/data/Aircraft/B-52F/Huds/B-5 2F-hudcard.xml Done reading instrument Gyrocompass Done reading instrument AMSL Done reading instrument RadioAltimeter Done reading instrument KIAS Done reading instrument Gauge1 Done reading instrument Gauge2 Done reading instrument Gauge3 Done reading instrument Gauge4 Done reading instrument Gauge5 Reading Instrument instrlabel from D:/Games/FlightGear/data/Aircraft/B-52F/Huds/ B-52F-instrlabel.xml Done reading instrument lattitude Done reading instrument longitude Reading Instrument fgTBI from D:/Games/FlightGear/data/Aircraft/B-52F/Huds/B-52F -fgtbi.xml Done reading instrument fgTBI_Instrument Code 1 Status 0 enter NewTgtAirportInit() NewTgtAirportId KSFO leave NewTgtAirportInit() . . . . . some more messages (I've set bulk logging) . . . . Program CRASH occurs here: Fatal error: Failed to gen source. (received from ) Deleting sample (<---- this is displayed few times) .. console is closed Thanks, Daniel On Wed, 19 Jan 2005 04:38:20 +0100, Arnt Karlsen <[EMAIL PROTECTED]> wrote: > On Wed, 19 Jan 2005 00:32:40 +0100, Dan wrote in message > <[EMAIL PROTECTED]>: > > > I have been trying to run FlighGear, but with no luck. It beeps after > > showing the slpash screen and loading for a few seconds, then crashes > > with something like "error at 0x...... address. memory can not > > write..." > > > > It beeps, with short beeps for about 10 times, then crashes. > > > > I was looking at mailing list archive, but they had proposed to try > > another aircraft or airport. I've tried different ones, none worked... > > > > Is there any aircract/airport included in standard download for > > Windows? > > > > I have Win2k, notebook with SIS chipset and on-board shared Video > > memory (set to 32 MB) and using version 0.9.6. > > > > It also ends with Failed to gen source bla blah .... deleting > > sample.... few times mesage. > > ..the "blah blah" is FlightGear telling _why_ it crashes, post it here. > > -- > ..med vennlig hilsen = with Kind Regards from Arnt... ;-) > ...with a number of polar bear hunters in his ancestry... > Scenarios always come in sets of three: > best case, worst case, and just in case. > > _______________________________________________ > Flightgear-users mailing list > [email protected] > http://mail.flightgear.org/mailman/listinfo/flightgear-users > 2f585eeea02e2c79d7b1d8c4963bae2d > -- Daniel Duris [EMAIL PROTECTED] _______________________________________________ Flightgear-users mailing list [email protected] http://mail.flightgear.org/mailman/listinfo/flightgear-users 2f585eeea02e2c79d7b1d8c4963bae2d
