Just a note, my gears run at 1300 fps. 3 to 5 fps looks suspicious. Is your
CPU big enough? When I run in UNaccelarated mode, usually, the speed is 0.5
to 1 fps and I have a 1 GHz chip!
JJM
> ----------
> From: Jim Ford[SMTP:[EMAIL PROTECTED]]
> Reply To: [EMAIL PROTECTED]
> Sent: Wednesday, August 29, 2001 4:42 AM
> To: [EMAIL PROTECTED]
> Subject: Re: [Flightgear-users] Matrox G400 - very low frame rate
> (with DRI)
>
> Norman Vine wrote:
>
> > Jim Ford writes:
> > >
> > >I'm running Flightgear with a 16meg Matrox G400 and XFree86 4.0.?
> > >logfile tells me that DRI is working (also the tux and flag demos in
> > >Plib look OK - but don't appear to give a frame rate). However
> > >the frame
> > >rate I'm getting with Flightgear seems pretty dire - 3 to 5 fps?
> >
> >
> > My guess is that you aren't getting any hardware acceleration
> >
> > What kind of framerate does the Mesa Gears program run at ?
>
> 73 rising to 90 fps (sometimes) - is this good?
>
> The logfile from XFree86 says that DRI is enabled - so I thought that
> hardware accel was working. There's also a message:
> Symbol vbeFree from module /usr/X11R6/lib/module/drivers/mga_drv.o is
> unresolved.
> I've seen this before in another installation and tried recompiling
> XFree86 4 and the drivers to make it go away, but to no effect. I've
> considered that because the XFree86 log file subsequently says that
> hardware accel is enabled, it had no proctical significance.
>
> Regards: Jim Ford
>
> _______________________________________________
> Flightgear-users mailing list
> [EMAIL PROTECTED]
> http://lists.sourceforge.net/lists/listinfo/flightgear-users
>
_______________________________________________
Flightgear-users mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/flightgear-users
